Ask a Question

Using Coded Dial Codes-ICMF 4270/MF4370dn/MF4350d/D480

Article ID: ART120629 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

Follow this procedure to send faxes to registered recipients using a Coded Dial codes.

Solution

Using Coded Dial Codes

Follow the procedure below to send faxes to registered recipients using coded speed dialing codes. You can specify up to 100 recipients using coded speed dialing codes.


To use this feature, you must register recipients in coded speed dialing codes beforehand.

  1. Set documents.
    Place the first page on the platen glass if you are not using the ADF.

  2. Press <FAX>.

  3. Press <Coded Dial>.

  4. Enter the desired two-digit code (00 to 99) with the numeric keys.


    If you entered a wrong code, press <Stop/Reset>, then try again from step 3.

  5. Press <Start>.
    When you set the document on the platen glass, press <Start> for each document. When scanning is complete, press <OK> to start sending.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments