Ask a Question

Setting up Caller ID on the FAX-JX200

Article ID: ART151620 | Date published: 05/22/2015 | Date last updated: 12/29/2015
 

Description

Setup the Caller ID feature on the fax machine to screen incoming calls.

Solution

Setting CALLER ID

If the [CALLER ID] setting is set to [ON], the caller's name and phone/fax number appear on the LCD when you receive a call.

Note : To use this feature, you will need to subscribe for a Caller ID service. The Caller ID feature uses the Telcordia or the ETSI EN 300 778-1 protocol. Contact your local telephone company for detailed information on this service.

1. Press <Menu>.

2. Use to select [DATA REGSTRATION], then press <Start/Copy>.

3. Use to select [CALLER ID], then press <Start/Copy>. The LCD displays [OFF].

To disable Caller ID feature, use to select [OFF], then press <Start/Copy>.

To enable Caller ID feature, use to select [ON], then press <Start/Copy>.

4. Press <Stop> to return to standby mode.



SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments