Sending a Fax

Follow this procedure to send a fax.

1. Set a document.
   
   Place the document on the platen glass or load it in the ADF.
   
   
2. Enter the fax mode.
   
   Press <FAX>. The FAX indicator lights and the machine enters fax standby mode.
   
   
3. Enter the fax number.
   
   Dial the recipient's fax number with the numeric keys.
   
   
   
   
   If you enter a wrong number, go back to the wrong digit with <>, then press <Clear> to delete it. Or press and hold <Clear> to delete the entire entry. Then try again.
   
   
4. Send the document
   
   Press <Start>. When you set the document on the platen glass, press [Start] for each document. When scanning is complete, press [OK].
   If <CONFIRM NEW DEST.> is set to <ON> in the <TX SETTINGS> of the <FAX SETTINGS> menu, you need to enter the fax number again after pressing [Start].
   
   
   If you press <Stop/Reset> to cancel a job during scanning documents or after scanning documents, the [CANCEL DURING TX/RX?] message appears. Press <> to select [Yes]. The job is canceled, and the display returns to standby mode.