Remove Packing Material MP490
Article ID: ART132177 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
Remove packing material so that the print head holder can move.
Solution
Remove Packing Material
Remove packing material so that the print head holder can move.
- Confirm that the printer is powered off (1).
- Open the paper output tray (2) (as shown above) and then lift up the scanning unit cover until it locks into position (C).
*MP480 shown
Caution: If the front cover is opened with the printer powered on, the print head holder may not operate properly, resulting in injury or printer problems.
- Pull the orange protective tape (D) and remove the protective material (E).
- Lift the scanning unit cover (B) slightly and fold the scanning unit support (C) and then gently close the scanning unit cover (B).
- Power the printer back on.