Accessing the Settings Title Page
The various settings on the VB101 are specified by using a browser to access Web pages on the VB101. You begin by accessing the Settings Title Page.
1. Use the browser to access http://192.168.100.1/"path".
Use the IP address specified in "Initial Setup" and in the "path" field, use the path specified in "System Settings page" The default setting for "path" is "admin".
2. Enter the user name and password.
You are now asked for your user name and password. In the factory default settings, the user name is "root" and the password is "VB101". Enter these settings. These can be changed at any time from the "System Settings page"
Note
Indication of the settings title page
The configuration of the settings pages that can be accessed from the settings title page varies greatly depending on whether Webview Livescope or VIEW-Windows is selected as the target application in "Basic Settings". VIEW-Windows is an optional product designed specifically for use within Japan. Do not select VIEW-Windows 1.21.
Settings Title Page
The various settings on the VB101 are specified by using a browser to access Web pages on the VB101. From this title page, you can move to each settings pages and confirm the changes to the settings, write the changes to the VB101 memory and perform restarts.
Note
- Do not open multiple browser windows at the same time to change settings in parallel.
- Do not use the "Back" and "Forward" buttons in your browser to move between settings pages. Due to the effects of caching, there are possibilities that an old settings page will appear, settings will return to their original values, or unintended changes will occur.
- When you change the settings, you should always click the "Send Config. to VB101", or the "Send Config. and Reboot VB101" button.
Click the [OK] button when you have changed the settings. To discard the changes, click the [Cancel] button. You are then returned to the settings title page.
Basic Settings Settings Page
This page contains indispensable settings taken from the various settings pages for the VB101. If values are specified for these settings on other pages, the most recent change is valid.
"Use Ethernet" - Tick this checkbox to use Ethernet.
"Address Settting Method" - If you select "Auto Setting (Bootp)", the IP address is automatically acquired by the Bootp server after restart. If you select "Manual Setting", enter the IP address and subnet mask also.
"IP Address" - Enter a network interface-specific IP address.
"Subnet Mask" - Enter the subnet mask specified for the network to be connected.
"Default Gateway Address" - Specify this setting when you are connecting to a wide area network such as the Internet.
If you selected "Auto Setting (Bootp)" as the address setting method, check that the Bootp server has been started up.
Contact the network administrator for the IP address, subnet mask, and default gateway address settings.
Click the [OK] button to change the settings. To discard the changes, click the [Cancel] button. This returns you to the title page.
VIEW-Windows is an optional product designed specifically for use within Japan. Do not select VIEW-Windows 1.21.
