Connecting a Telephone Line Follow the onscreen instructions provided by "Fax Setup Guide" to connect the telephone line. Take the following steps to display "Fax Setup Guide" on the screen. [  ] (Menu) -> <Fax TX Settings> -> <Fax Setup Guide> 1. Press [OK]. The screen that appears varies, depending on the Receive mode selected. 2. Connect the machine to the telephone line connector.  If you use an external telephone: Proceed to step 3. If you do not use an external telephone: Proceed to step 4. 3. Connect an external telephone to the machine. * To connect an external telephone that includes fax functions, make sure to disable its automatic fax reception feature so it does not receive faxes automatically. 4. Press [OK] after the telephone line has been connected. 5. Press [  ] to highlight <Yes>, and then press [OK]. The setup procedure is complete. 6. Press [OK]. 7. Restart the machine to take effect the settings. Turn OFF the machine and wait for at least 10 seconds before turning it back ON. 8. Change the line type. - By default, the telephone line type is set to tone dialing. Skip the following steps in the procedure below when you select tone dialing.
- Follow the steps in the procedure below to select pulse dialing.
- Contact your local telephone company if you are not sure of the line type that you are using.
(1) Press [ ] (Menu). (2) Press [  ] or [  ] to highlight <Fax TX Settings>, and then press [OK]. (3) Press [ ] or [ ] to highlight <Basic Settings>, and then press [OK]. (4) Press [ ] or [ ] to highlight <Select Line Type>, and then press [OK]. (5) Press [ ] or [ ] to highlight the line type you want to use, and then press [OK]. - <Pulse>: Pulse dialing
- <Tone>: Tone dialing (Default)
(6) Press [ ] (Menu) to close the Menu screen.
| 
