You may occasionally need information about your wireless network, such as your machine's IP address or signal strength.
Follow these steps to get a printout similar to the one you see below.
These steps are specific to MX490 / MX492 printers.
Get instructions for other printer models.
Get a network settings printout
-
Make sure the printer is turned ON.
-
Press the Setup button.
-
From the Setup menu screen, use the right / left arrow 
buttons to select Device settings, then press the OK button.
-
Use the right / left arrow buttons to select LAN settings, then press OK.
-
Use the right / left arrow buttons to select Print LAN details, then press the OK.
The network settings will print and will look similar to the example below.
Sample printout
|
Item
|
Explanations of the item
|
Setting
|
|
Wireless LAN
|
Wireless LAN
|
Enable/Disable
|
|
Connection
|
Connection status
|
Active/Inactive
|
|
MAC Address
|
MAC Address
|
XX:XX:XX:XX:XX:XX
|
|
SSID
|
SSID
|
SSID of the wireless LAN/SSID of the access point mode
|
|
Password
|
Password
|
Password of the access point mode (8 to 10 alphanumeric characters)
|
|
Communication Mode
|
Communication Mode
|
Infrastructure/Access Point Mode
|
|
Channel *1
|
Channel
|
XX (1 to 13)
|
|
Encryption
|
Method of the Encryption
|
none/WEP/TKIP/AES
|
|
WEP Key Length
|
WEP Key Length
|
Inactive/128/64
|
|
Authentication
|
Method of the Authentication
|
none/auto/open/shared/WPA-PSK/WPA2-PSK
|
|
Signal Strength
|
Signal Strength
|
0 to 100 [%]
|
|
TCP/IP Version
|
TCP/IP Version
|
IPv4 & IPv6/IPv4
|
|
IPv4 IP Address
|
Selected IP Address (IPv4)
|
XXX.XXX.XXX.XXX
|
|
IPv4 Default Gateway
|
Default Gateway (IPv4)
|
XXX.XXX.XXX.XXX
|
|
Subnet Mask
|
Subnet Mask
|
XXX.XXX.XXX.XXX
|
|
IPv6 IP Address *2
|
Selected IP Address (IPv6)
|
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
|
|
IPv6 Default Gateway *2
|
Default Gateway (IPv6)
|
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
|
|
Subnet Prefix Length *2
|
Subnet Prefix Length
|
XXX
|
|
IPsec *3
|
IPsec setting
|
Active
|
|
Security Protocol *3
|
Method of the Security Protocol
|
ESP/ESP & AH/AH
|
|
Wireless LAN DRX
|
Discontinuous reception (wireless LAN)
|
Enable/Disable
|
|
Other Settings
|
Other settings
|
-
|
|
Printer Name
|
Printer name
|
Printer name (Up to 15 alphanumeric characters)
|
|
WSD
|
WSD setting
|
Enable/Disable
|
|
WSD Timeout
|
Timeout
|
1/5/10/15/20 [min]
|
|
LPR Protocol
|
LPR protocol setting
|
Enable/Disable
|
|
Bonjour
|
Bonjour setting
|
Enable/Disable
|
|
Bonjour Service Name
|
Bonjour service name
|
Bonjour service name (Up to 52 alphanumeric characters)
|
|
DNS Server
|
Getting DNS Server automatically
|
Auto/Manual
|
|
Primary Server
|
Primary server address
|
XXX.XXX.XXX.XXX
|
|
Secondary Server
|
Secondary server address
|
XXX.XXX.XXX.XXX
|
|
Proxy Server
|
Proxy Server setting
|
Enable/Disable
|
|
Proxy Port
|
Specifying Proxy Port
|
1 to 65535
|
|
Proxy Address
|
Proxy Address
|
XXXXXXXXXXXXXXXXXXXX
|
("XX" represents a set of numbers.)
*1 Depending on the country or region of purchase, one of the channels from 1 to 11 is printed.
*2 Only when IPv6 is enabled, the status of the network is printed.
*3 Only when IPv6 and the IPsec setting are enabled, the status of the network is printed.
