How to recharge the battery for the PowerShot G2.
Article ID: ART106959 |
| |
Date published: 05/11/2015 |
| |
Date last updated: 08/15/2015 |
Description
How to recharge the battery for the PowerShot G2.
Solution
Recharge Level
|
Red Lamp
|
0-50%
|
Blinks once per second
|
50-75%
|
Blinks twice per second
|
75-90%
|
Blinks three times per second
|
90% or higher
|
Stays on
|
-
Do not recharge any battery pack other than Battery Pack BP-511 or BP-512.
-
If the battery is left in the camera for a prolonged period without the camera being used, a low electrical current may be discharged excessively and the battery's service life may be affected. When not using the camera, remove the battery and attach the protective cover to prevent shorting. Before using the camera again, be sure to recharge the battery.
-
After the red lamp lights, continue to recharge the battery for an hour to attain a full charge.
-
After recharging the battery, detach it and unplug the power cord from the power outlet.
-
The time required to recharge the battery depends on the ambient temperature and battery's power level.
-
The battery pack can operate in temperatures from 0oC to 40oC (32oF to 104oF), however for full operating performance, use between 10oC (50oF) and 30oC (86oF) is recommended. In cold locations such as ski areas, battery performance is temporarily decreased and operating time may be reduced.
-
If operating time is sharply reduced even after charging normally, the battery pack may have exceeded its useful life. Replace it with a new battery pack.
|