Ask a Question

How to select processing parameters on the EOS 1D

Article ID: ART104823 | Date published: 05/11/2015 | Date last updated: 11/04/2015
 

Description

How to select processing parameters on the EOS 1D

Solution

The image you capture can be processed automatically by the camera according to the parameters you specify with the driver software. You can set and register up to three sets of processing parameters. (For details, see the separate "EOS-1D Software Instructions") The procedure below describes how you can select one of the processing parameters to be used by the camera.

If you have not register any processing parameters, you will only be able to select "Standard" for the parameter setting.

On the menu, select "Parameters."
  • Press the <MENU> button.
  • While pressing the <MENU> button, turn the <> dial to select <SELECT>.
  • While pressing the <SELECT> button, turn the <> dial to select "Parameters." Then let go of the button.

Select the desired set of processing parameters.

  • While pressing the <SELECT> button, turn the <> dial to select the desired set of processing parameters. Then let go of the <SELECT> button.
  • The main menu will reappear.
  • To exit the menu and turn off the LCD monitor, press the <MENU> button.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments