Procedure for replaying images PowerShot A530 and A540

Article ID: ART125849 | Date published: 05/12/2015 | Date last updated: 08/14/2015
 

Description

Procedure for replaying images PowerShot A530 and A540

Solution

Replaying

Displaying Images Individually

  1. Set the mode switch to . The last recorded image appears (single image replay).


  2. Move between images using the or button.
    - Use the button to move to the previous image and the button to move to the next. Holding the or button moves more rapidly between images, but the images will not appear as clearly.

  • Press the <DISP.> button to show the data for the displayed image.
  • Press the button to quickly delete the displayed image.

Magnifying Images. Images can be magnified up to approximately 10 times.

  1. Set the mode switch to .
  2. Press the zoom lever toward .


    - You can move around the magnified image using the , , or button.
    - Hold the <FUNC./SET> button down and press the zoom lever toward to cycle through each setting, approximately 2.5 times, to approximately 5 times and 10 times.

Canceling the Magnified Display

  1. Press the zoom lever toward .

Movie frames and index replayed images cannot be magnified.

You can magnify an image while it is displayed on the LCD monitor in Shooting mode immediately after the image is shot.

Viewing Images in Sets of Nine (Index Replay)

Up to nine images can be viewed at once in index replay.

  1. Set the mode switch to .
  2. Press the zoom lever toward .


    - Nine images appear at once (index replay).
  3. Change the image selection using the , , or button.


  4. Press the zoom lever toward . Index replay cancels and the display reverts to single image replay.

Press the <DISP.> button to show the data for the displayed image.

JUMP Jumping Between Images. The display can be advanced or set back 9 images in either single image replay or index replay.

  1. Display the JUMP bar.
    - Press the zoom lever twice toward while in single replay.
    - Press the zoom lever once toward while in index replay.
  2. The displayed image(s) change. Jump 9 images behind or ahead using the and buttons.


  3. Press the zoom lever toward .
    - The jump bar disappears and the camera returns to index replay.
    - If you press the zoom lever once more toward , the camera returns to single replay.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments