Make sure there is no document on the platen glass.
Fan the edges that will feed into the machine first, then tap the edges of multiple page documents on a flat surface to even the stack.
Adjust the slide guides to the width of the document.
Load the documents face up in the ADF.
The document is now ready for scanning.
For a multiple page document, the pages are fed one by one from the top of the stack (from the first page).
Wait until all pages of your document have been scanned before starting a new job.
50 sheets of letter-size (17 to 20-lb bond or 64 g/m2 to 80 g/m2 ) documents can be set in the ADF. If more than 50 sheets (letter size) of documents are set in the ADF, paper jams may occur.
30 sheets of legal-size (17 to 20-lb bond or 64 g/m2 to 80 g/m2 ) documents can be set in the ADF.
The Paper Path of the Automatic Document Feeder (D340 only)
When documents are set in the ADF, the scanning unit moves to the position shown in the figure above and it is fixed there. When documents are not set in the ADF, the scanning unit moves to scan it.
