How to remove the memory cards from the EOS 1D Mark II, EOS 1D Mark II N, and EOS 1Ds Mark II.
| Article ID: ART157821 |
| |
Date published: 06/09/2015 |
| |
Date last updated: 08/17/2015 |
Description
How to remove the memory cards from the EOS 1D Mark II, EOS 1D Mark II N, and EOS 1Ds Mark II.
Solution
| 1 |
1. Before opening the cover.
- Turn the <switch> switch to <OFF>.
- Make sure the access lamp is off and "buSY" is not displayed on the top LCD panel. Then open the cover.
|
1 |
2. Take out the memory card.
- To remove the CF card, press the eject button.
- To remove the SD card, push it in to release it.
|
- The access lamp lights or blinks while the picture is taken, when data is being transferred to the memory card and when data is being recorded, read, or erased on the memory card. Never do the following while the access lamp is lit or blinking. Such actions may destroy the image data. It may also damage the memory card or camera.
-
- Shaking or banging the camera around.
- Opening the memory card slot cover.
- Removing the battery.
- After image capture, you cannot do any menu operation while the image is processed and recorded onto the memory card (lit or blinking access lamp).
- When the memory card becomes full, the "Card Full" warning will appear on the LCD panel and in the viewfinder. Shooting will be disabled. Replace the memory card with one that is not full.
- If "Card Err" (Card error) is displayed on the LCD panel, it indicates a problem with the memory card that is preventing the image data from being recorded or read. Use another memory card instead.
| Card-full display |
Card error display |
 |
- If you use a low-capacity memory card, it might not be able to record large images.
- Microdrive cards are more vulnerable to vibration and physical shock. If you use a microdrive, be careful not to subject the camera to vibration or physical shock while recording or playing images.
- Do not touch the SD card?s contacts with your fingers or metal objects.
|
