Error Code |
Error Message |
Solution
|
1
4
10
122
151
175
176
177
|
Error in scanner.
Turn off scanner and follow instructions in User's Guide.
Scanner driver will be closed. |
- Make sure that your scanner or printer and the computer are connected correctly.
-
Delete MP Drivers, then reinstall MP Drivers from the Setup CD-ROM or the web page.
Refer to "Deleting the Unnecessary MP Drivers" for your model from Home of the Online Manual for how to delete MP Drivers.
-
Your scanner or printer may be damaged.
Restart the computer, then reconnect your scanner. If the same error message still appears, contact the service center.
|
140 |
Printer is in use or an error has occurred. Check status.
Scanner driver will be closed. |
- Wait for the device operation to finish, then scan.
|
145 |
Cannot communicate with scanner for these reasons:
- Scanner is turned off.
- Scanner is disconnected.
(It is disconnected from LAN, if using on LAN.)
Please check and try again.
Scanner driver will be closed. |
- Make sure that your scanner or printer is turned on.
-
Delete MP Drivers, then reinstall MP Drivers from the Setup CD-ROM or the web page.
Refer to "Deleting the Unnecessary MP Drivers" for your model from Home of the Online Manual for how to delete MP Drivers.
- Make sure that the selected application source is correct. Refer to the application's manual for details.
- Check the printer status.
- With USB connection, check the connection of the USB cable and reconnect as required.
- With network connection, check the connection status and reconnect as required.
-
With network connection, specify the scanner to use with IJ Network Scanner Selector EX.
|
155 |
Cannot communicate with scanner.
Cable may be disconnected or scanner may be turned off.
Check status.
Scanner driver will be closed. |
156 |
Cannot communicate with scanner for these reasons:
- Scanner is turned off.
- USB cable is disconnected.
Please check and try again.
Scanner driver will be closed. |
157 |
Cannot communicate with scanner for these reasons:
- Scanner is turned off.
- (If using Wired LAN connection) It is disconnected from Wired LAN.
- (If using wireless LAN connection) Signal strength is poor due to obstructions.
- Network connection is prohibited by security software.
- Different scanner on the network is selected.
Please check and try again.
Click [Scanner Selection] if you want to select another scanner.
Scanner driver will be closed. |
152 |
Running out of memory.
Increase available memory.
Scanner driver will be closed. |
- The memory required to start ScanGear (scanner driver) cannot be obtained; exit other applications.
|
201 |
A required file is missing or corrupted, or settings are incorrect.
Try the installation again.
Scanner driver will be closed. |
-
Delete MP Drivers, then reinstall MP Drivers from the Setup CD-ROM or the web page.
Refer to "Deleting the Unnecessary MP Drivers" for your model from Home of the Online Manual for how to delete MP Drivers.
|
202 |
An internal error has occurred.
Scanner driver will be closed. Take the following measures.
- Check the scanner status.
- Restart the scanner.
- Restart the computer, then try again.
- Reinstall the scanner driver. |
-
An internal error has occurred. Take the following measures.
- Check the scanner status.
- Restart the scanner.
- Restart the computer, then try again.
- Reinstall MP Drivers.
-
Follow the procedure below to check if WIA (Windows Image Acquisition) is running or in started state.
Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista:
Click Control Panel > System and Security > Administrative Tools, and then double-click Services to check if WIA (Windows Image Acquisition) is running or in started state.
Windows XP (G2200 and G3200 only):
From the Start menu, click Control Panel > Performance and Maintenance > Administrative Tools, then double-click Services.
- There may be interference with other drivers; delete unnecessary drivers.
- Your application may not properly comply with TWAIN. Scan using another application.
|
203 |
There is not enough free disk space to complete the scan.
Scanner driver will be closed. |
- Delete unnecessary files on the hard disk and scan again.
|
206 |
The scanner is not available while in use by another application or user. |
- Exit the ScanGear in use.
|
207 |
Scanner is not selected.
Click [Scanner Selection] to select scanner.
Scanner driver will be closed. |
|
208 |
IJ Network Scanner Selector cannot be found.
Reinstall scanner driver.
Scanner driver will be closed. |
-
Delete MP Drivers, then reinstall MP Drivers from the Setup CD-ROM or the web page.
Refer to "Deleting the Unnecessary MP Drivers" for your model from Home of the Online Manual for how to delete MP Drivers.
|
250 |
An error has occurred.
Turn the device off and then back on.
Scanner driver will be closed. |
- Turn the device off and then back on.
|
252 |
Cannot write or read file. |
- Exit running applications, check that there is sufficient free space on the hard disk, then scan again.
|