Accessing, changing or printing the LAN settings (MX860)
Article ID: ART114060 |
| |
Date published: 05/11/2015 |
| |
Date last updated: 08/17/2015 |
Description
When you change the connection method (wired or wireless), set up the machine according to the method you will use. For details, refer to your setup manual.
Solution
Accessing, Changing or Printing the LAN Settings
This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example.
Items | Setting (IPv4) | Setting (IPv6) |
---|
Connection | Active/Inactive | Active/Inactive |
IP address | XXX. XXX. XXX. XXX | XXX. XXX. XXX. XXX. XXX. XXX. XXX. XXX |
Subnet mask | XXX. XXX. XXX. XXX | - |
Subnet prefix length | - | XXX |
Default gateway | XXX. XXX. XXX. XXX | XXX. XXX. XXX. XXX |
MAC address | XX:XX:XX:XX:XX:XX | XX:XX:XX:XX:XX:XX |
IPsec settings | - | Active/Inactive |
Security protocol | - | ESP/ESP & AH/AH |
Pre-shared key | - | XXXXXXXXXXX |
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
IPv4/IPv6 setting
Selects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.
WSD setting
Activates/deactivates the WSD (one of the network protocols supported in Windows 7 and Windows Vista) setting.
Note