Setting DRPD

Note: If your MultiPASS is connected to a PC, we recommend using the MultiPASS Desktop Manager to adjust any settings. Using the operation panel and the MultiPASS Desktop Manager may cause confusion. Changes made to settings through the operation panel will not be displayed in the MultiPASS Desktop Manager, and changes made in the MultiPASS Desktop Manager will override any corresponding settings made through the operation panel.

To set DRPD as the receive mode, follow this procedure:

1.Press

2. Press

3. Press

4. Use to select [RX SETTINGS].

5. Press

6. Use to select [RX MODE]

7. Press

8. Use to select [DRPD]

9. Press

10. Use to select the type of ring pattern you want to set.

You can select from the following:

• NORMAL RING
  
• DOUBLE RING
  
• SHORT-SHORT-LONG
  
• SHORT-LONG-SHORT
  
• OTHER RING TYPE
  

11. Press twice.

12. Use the numeric buttons to enter the fax/ telephone number assigned for receiving a call for the ring pattern you selected in step 10 (max. 20 digits, including spaces).

• This number is transmitted to the caller?s fax machine and displayed in the caller?s LCD as verification.
  
• To enter a space, press <Space>.
  
• To enter a plus sign (+) before the number, press< +>.
  
• If you make a mistake, press <Clear> and start again.
  

13. Press twice.

14.Use the numeric buttons to enter the fax/ telephone number assigned for receiving a call for the ring pattern you selected in step 10 (max. 24 characters,, including spaces).

• This name is transmitted to the caller?s fax machine and displayed in the caller?s LCD as verification.
  
• If you make a mistake, press <Clear> and start again.
  

15. Press twice.

16. Use to select the type of call to be received for the ring pattern you selected in step 10.

Ex:

You can select from the following:

• TEL
  
• FAX
  
• FAX/TEL AUTO SW
  

17. Press .

18. To continue registering other ring patterns, repeat the procedure from step 10 or press <STOP> to return to standby mode.

Note: If the RX MODE setting is set to DRPD, only [DRPD] will be displayed in the LCD when <Receive Mode> is pressed.