Print head alignment corrects the installation positions of the print head and improves deviated colors and lines.
This printer supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the printer is set for automatic head alignment.
If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
The procedure for performing automatic print head alignment is as follows:
Print Head Alignment
-
Select Test Print from the pop-up menu on the Canon IJ Printer Utility.
-
Click the Print Head Alignment icon.
A message is displayed.
-
Load paper in the printer.
Load one sheet of A4 size or Letter size plain paper into cassette 1.
Important
- Cassette 2 is not available for the print head alignment procedure. Be sure to load paper in cassette 1.
Note
- The number of sheets to be used differs when you select the manual head alignment.
- If the cassette paper information registered on the printer is not set to A4 size and plain paper, an error may occur. For instructions on what to do if an error occurs, see "Paper setting for Printing."
-
Execute head alignment
Make sure that the printer is on and click Align Print Head.
Print head alignment starts.
Important
- Do not open the front cover while printing is in progress.
Note
- Wait until printing ends before performing other operations. Printing takes about 3 to 4 minutes to complete.
Note
- After head alignment is completed, you can print and check the current setting. To do so, click the Print Head Alignment icon and when the message is displayed, click Print Alignment Value.
iB4020 Page
