You can set the machine to automatically reduce received documents so that the whole document is printed within the printable area of the paper. The default setting is <ON> (<AUTO> and <VERTICAL ONLY>).
1. Press 
[Menu].
2. Press 
or 
to select <TX/RX SETTINGS>, then press [OK].
3. Press 
or 
to select <TX/RX COMMON SET.>, then press [OK].
4. Press 
or 
to select <RX SETTINGS>, then press [OK].
5. Press 
or 
to select <RECEIVE REDUCTION>, then press [OK].
6. Press 
or 
to select <ON>, then press [OK].
If you select <OFF>, skip to step 12.
7. Press 
or 
to select <RX REDUCTION>, then press [OK].
8. Press 
or 
to select <AUTO> or <FIXED REDUCTION>, then press [OK].
If you select <AUTO>, the image is reduced automatically. Skip to step 10.
If you select <FIXED REDUCTION>, go to the next step.
9. Press 
or 
to select a preset reduction ratio (90%, 95%, 97%, or 75%), then press [OK].
10. Press 
or 
to select <REDUCE DIRECTION>, then press [OK].
11. Press 
or 
to select <VERTICAL ONLY> or <HORIZ & VERTICAL>, then press [OK].
12. Press 
[Stop/Reset] to return to the standby mode.
