Adjusting/Changing the RX Reduction settings

Sometimes it is necessary to receive a fax using RX reduction. Follow these steps to adjust/change the RX reduction settings.

1. Press <Additional Functions>.
   The <Additional Functions> key blinks.
   
   
2. Press <> or <> to select [3. FAX SETTINGS], then press <Set>.
   
   
3. Use < > or < > to select [5. PRINTER SETTINGS], then press <Set>.
   
   
4. Confirm that [1. RX REDUCTION] is displayed, then press <Set>.
   You can select from the following:
   
   [ON] - Turns on image reduction.
   [OFF] - Image reduction is turned off.
   
   
5. If you select [ON], confirm that [1. RX REDUCTION] is displayed, use <> or <> to select the settings you want, then press <Set>.
   You can select from the following:
   
   [AUTO SELECTION] - Automatically selects the reduction size (default setting).
   [FIXED REDUCTION] - Reduction size is preset. Available options are: 97%, 95%, 90% or 75%.
   
   
6. Confirm that [2. SELECT REDUCE DIR] is displayed, use <> or <> to select the settings you want, then press <Set>.
   You can select from the following:
   
   [VERTICAL ONLY] - Reduction is performed in the vertical direction only (default setting).
   [HORIZ & VERTICAL] - Reduction is performed in the horizontal and vertical direction.
   
7. Press <Stop/Reset> to return to standby display.