Raise the [ISO speed] to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area.
1. Press the <Power> button on the camera.
2. Press the <FUNC./SET> (
) botton.
3. The following screen appears on the LCD monitor.
Operate the <Directional buttons> up and down to select [Auto] (
).
4. Select the [ISO Speed].
Operate the <Directional buttons> right and left to select the [ISO Speed]*.
After the settings are completed, press the <FUNC./SET> () button.
* The appropriate [ISO Speed] differs depending on shooting locations. If the camera shake warning icon (
) appears when you press the <Shutter Button> halfway, it is recommended to gradually raise the ISO speed in increments such as [ISO 80], [ISO 100], etc., and then set the [ISO Speed] when the camera shake warning icon () disappears.
5. If the following icon is shown, the setting is complete (if setting [ISO Speed] to 400).
attention:
- Raising the [ISO Speed] results in a faster shutter speed. Therefore, you can shoot images with less subject blur and camera shake.
- However, the higher the [ISO Speed], the more the noise stands out (more uneven areas in an image).
|
Note:
- With [ISO 3200], you can set an even faster speed.
How to set [ISO 3200] : Set the [Shooting Mode] to [SCN] ( ). Operate the <Directional buttons> up or down to select [ISO 3200] ( ) from the items displayed.
- When the camera is set to [ISO 3200], Recording pixels are set to (
 ) (1600 x 1200 pixels).
- When the camera is set to [ISO 3200], noise may stand out.
|
).
) in [SCN] (