Setting custom functions - Sure Shot Z150u
| Article ID: ART122508 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
Setting custom functions - Sure Shot Z150u
Solution
Setting custom functions - Sure Shot Z180u
|
 |
|
1) Set the camera to Custom Function setting mode
With the power off, hold down the  button and press the  button.
"CF 1-0" appears on the LCD panel
|
|
2) Select a function
Each time you press the  button, the Custom Function number changes.
|
3) Select the function
- Press the button to change the setting display to 1 (function enabled).
Press the button again to change the setting to 0 (function disabled)
- Turning the power on completes the settings.
|
|
CF1: Real-time Release
Refer to RT Shooting in Real Time for information on using the Real-Time Release funtion
|
|
CF2: Shooting Mode and Flash Mode Memory
Stores the shooting mode and the flash mode in memory immediately before the camera is switched off. Useful when you always want to set the shooting mode and the flash mode to a particular mode
|
|
CF3: Disabling Automatic Film Rewind
Useful far situations where you do not want the sudden sound of the film rewinding. When you reach the end of the roll. the number on the frame counter and the  blink. Press the  button to start film rewinding.
|
|
CF4: Center-point AF
A convenient function when you want to place your subject off center (using focus lock) or focus on one particular subject. The subject must be positioned in the center of the wide area AF frame.
|
|
CF5: Continuous Shooting
While the shutter button is pressed. you can take continuous shots,
|
Note:
- The Custom Functions were all set to zero (0) at the factory setting.
- The Custom Function settings are retained even when you Switch the camera off and on, replace the film, or replace the battery.
|
