Ask a Question

Adjust the [Special Smoothing Mode] setting (LBP7200)

Article ID: ART108568 | Date published: 05/11/2015 | Date last updated: 08/16/2015
 

Description

Adjust the [Special Smoothing Mode] setting

Solution

Adjust the [Special Smoothing Mode] setting

Perform the following procedure in the printer driver.

1. Display the [Finishing] sheet.

2. Click [Advanced Settings].

3. Select the appropriate mode for [Special Smoothing Mode].

Normally, select [Mode 1] for [Special Smoothing Mode].
If the following conditions occur when [Mode 1] is selected, select any setting between [Mode 2] and [Mode 6].

  • If gradations cannot be printed smoothly

Select [Mode 2].

  • If the following problems occur at the same time

Gradations cannot be printed smoothly.

The areas around large characters or thick lines (especially those with low color density) are not printed smoothly.

Select [Mode 3].

  • If the areas around large characters or thick lines (especially those with low color density) are not printed smoothly

Select [Mode 4].

  • If strip-shaped unevenness appears on gradations

Select [Mode 5].

  • If shaded patterns deviate (incorrect shaded patterns occur)

Select [Mode 6].

IMPORTANT

Precautions when specifying [Special Smoothing Mode]

  • When [Mode 2] or [Mode 3] is selected, areas around diagrams may not be printed smoothly.

  • When [Mode 3] or [Mode 4] is selected, color unevenness may appear on large characters and thick lines.

  • When [Mode 5] is selected, characters, lines, and areas around diagrams may not be printed smoothly.

  • When [Mode 6] is selected, color unevenness may appear on characters, lines, diagrams, and images (photographs etc.).

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments