Ask a Question

Changing Control Ring Settings (PowerShot G9 X Mark II)

Article ID: ART167200 | Date published: 01/17/2017 | Date last updated: 01/17/2017
 

Description

Changing Control Ring Settings (PowerShot G9 X Mark II)

Solution

Solution

Changing Control Ring Settings

Reassign control ring functions as follows.
Using the control ring is an enjoyable way to control the camera as you would a fully manual camera.

1.Turn the camera on.
  • Press the power button.
  • The startup screen is displayed.

2.Access the menu screen.
  • Press the [MENU] button.

3.Choose a function to assign to the [ ] ring.
  • Touch [ ], and then touch [2].

  • Touch [ Settings ], and then press the [ ] button.

  • Touch [ Switch with ].

  • Touch [Disable] on the screen displayed.

  • Touch [Set Function].

4.Configure the assigned function.
  • Touch the desired menu item on the screen displayed to select it.
  • Press the < > button to complete the setting.

Functions Assignable to the Control Ring

Functions you can assign to the control ring vary depending on shooting mode.
ItemShooting Mode
/
Adjust the ISO speed
Correct the exposure
Correct white balance
Perform step zooming (except in mode)
Set the Auto Lighting Optimizer effect
Adjust the aspect ratio (except in mode)

NOTE
  • The [ ] ring can be used for step zooming in [AUTO] or [ ] mode.
ID: 8203348700_EN_1

SIMS Doc Id

8203348700

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments