If an error message is displayed on the LCD, take the corresponding action described below.

Message	Action
"There are no photos in memory card."	There are no image data saved on the memory card that can be read by this machine. The machine may not recognize the file if the file name or the folder path contains certain characters. Use only alphanumeric characters. Photo data edited or processed on a computer must be printed from the computer.
"The following ink may have run out. Replacing the ink tank is recommended." U041	If the lamp on the ink tank is flashing, ink may have run out. Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the OK button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition.   See Replacing an Ink Tank   Note If multiple ink lamps are flashing red, see Getting the Ink Status Information and check the status of each ink tank
"The following ink has run out. Replace the ink tank." U163	Ink has run out. (The lamp on the ink tank flashes.) Replace the ink tank and close the Scanning Unit (Printer Cover). Printing under the current condition may damage the machine. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the Stop/Reset button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition. See Replacing an Ink Tank   Note If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed in the remaining ink volume screen on the LCD. See Getting the Ink Status Information
"Print head is not installed. Install the print head." U051 "The type of print head is incorrect. Install the correct print head." U052	Follow the directions given in your setup sheet to install the Print Head. If the Print Head is already installed, remove the Print Head once and then reinstall it. If the error is not resolved, the Print Head may be damaged. Service is required. For support and service options, sign into (or create) your Canon Account from the link below. My Canon Account
"Inner cover is open. Close the inner cover and press OK."	If the Inner Cover is open when starting printing, close it and then press the OK button on the machine. Do not open or close the Inner Cover while printing, as this can damage the machine.
"Some ink tanks are not installed in place." U072 "More than one ink tank of the following color is installed." U071	Possible causes are as follows: Some ink tanks are not installed in the correct position. (The lamp on the ink tank flashes.) More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.) Confirm that the ink tanks are installed in the appropriate positions. See Replacing an Ink Tank
"The ink absorber is almost full. Press OK to continue printing. Contact the service center."	The machine has a built-in ink absorber to hold the ink used during Print Head Cleaning, for example. This error message indicates that the ink absorber is nearly full. Press the OK button to cancel the error so you can continue printing. However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible. (You will need to replace a particular part of the machine.) For support and service options, sign into (or create) your Canon Account from the link below. My Canon Account
"The device may be incompatible. Remove the device and check the manual supplied with the connected device."	A communication time out occurs if an operation takes too long or if it takes too much time to send data. This may cancel printing. In such cases, disconnect and reconnect the USB cable. When printing from a PictBridge compliant device, depending on the model or brand of your device, you may have to select a PictBridge compliant print mode on the device before connecting it to the machine. You may also have to turn on your device or select Play mode manually after connecting the device to the machine. Perform necessary operations before connecting your device referring to its instruction manual. If the error is still not resolved, check if you can print another photograph. Check your device connected to the machine. Only PictBridge compliant devices or the optional Bluetooth Unit BU-20 can be connected to the machine for direct printing. If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the machine.
"Auto head align has failed. Press OK and repeat operation. <See manual>"	Possible causes are as follows: Print Head nozzles are clogged. Press the OK button to dismiss the error message, and print the nozzle check pattern to check the status of the Print Head. Printing the Nozzle Check Pattern Paper of size other than A4 or Letter is loaded in the Rear Tray. Press the OK button on the machine to dismiss the error message, then load a sheet of A4/Letter-sized plain paper in the Rear Tray. Automatic Print Head Alignment cannot be performed using paper from the Cassette. For Automatic Print Head Alignment, always load paper in the Rear Tray. The Paper Output Slot is exposed to strong light. Press the OK button to dismiss the error message, and then adjust your operating environment and/or the position of the machine so that the Paper Output Slot is not exposed directly to strong light. After carrying out the above measures, if the problem continues after aligning the Print Head again, press the OK button to dismiss the error message, and then perform Manual Print Head Alignment. Windows Macintosh
"The remaining level of the following ink cannot be correctly detected. Replace the ink tank." U130	The remaining ink level cannot be correctly detected. (The lamp on the ink tank flashes.) Replace the ink tank and close the Scanning Unit (Printer Cover). Printing with an ink tank that was once empty may damage the machine. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the Stop/Reset button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink tanks. See Replacing an Ink Tank   Note If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed in the remaining ink volume screen on the LCD. See Getting the Ink Status Information
"The following ink tank cannot be recognized." U043 U140 U150	The ink tank is not installed. Install the ink tank. See Replacing an Ink Tank   The ink tank is not compatible with this machine. (The lamp on the ink tank is off.) Install an appropriate ink tank. See Replacing an Ink Tank   An ink tank error has occurred. (The lamp on the ink tank is off.) Replace the ink tank. See Replacing an Ink Tank
"**** Printer error has occurred. Turn off power then back on again. If problem persists, see the manual." Examples: 5200, 6000, 5C00, 6A00,  5C20, 9000, etc.	Turn off the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in, and then turn on the machine. If the same error occurs, service is required. For support and service options, sign into (or create) your Canon Account from the link below. My Canon Account
"Scanner is not operating correctly."	Turn off the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in, and then turn on the machine. If the same error occurs, service is required. For support and service options, sign into (or create) your Canon Account from the link below. My Canon Account
"The card is currently write-enabled. Set to read-only mode before performing operation."	The Card Slot is set to Read/write mode. You cannot print in this mode. After writing on the memory card, set to Read-only mode again.
"An unsupported USB hub is connected. Remove the hub."	If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the machine.