Ask a Question

Replacing the Retard Roller.(DR-M160)

Article ID: ART112721 | Date published: 05/11/2015 | Date last updated: 08/17/2015
 

Description

Use the following procedure to remove/replace the retard roller.

Solution

Use the following procedure to remove/replace the retard roller.

  1. Open the document eject tray.



  2. Pull the OPEN lever and pull open the front unit toward you.



  3. Open the roller cover.



  4. Pull the left lever that secures the retard roller to the scanner, and remove the roller.





  5. Install the (new) retard roller by inserting the right side first.



  6. Push the left side of the retard roller to secure it to the scanner.



  7. Close the roller cover.



  8. Close the front unit.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments