Untitled Document
How to install / replace / reseat the print head / ink tanks
Important: The print head must be installed before ink tank. Failure to do so may damage the printer.
Note: if replacing the ink tank, first remove it properly.
1. Ensure that the printer is powered on.
2. Open the cover by sliding the cover open switch to the right and lifting the cover. The print head holder will move to the replacement position.
Note: When the top cover is opened more than ten minutes, the print head moves to the right side.
If this occurs, close the top cover, and open it again.
When installing the print head, proceed to step 3.
When installing the ink tank, proceed to step 4.
3. Install the print head.
Important: The print head must be installed before ink tank. Failure to do so may damage the printer.
3-1. Raise the print head lock lever.
3-2. Pull out the print head from its package, then remove the orange protective cap from it.
Caution: Do not touch the ink supply ports <1> and the print head nozzles <2>.
Doing so may cause printing problems.
3-3. Place the print head in the holder and lower the print head lock lever carefully until you hear a click.
4-1. Unpack the ink tank and remove the orange protective cap.
Caution: Do not touch the ink ports <3> or ink tank circuit <4>. Doing so may occur printing problems.
Do not reattach the protective cap once you have removed it.
4-2. Insert the ink tank into the print head.
Note: Insert the ink tank at an angle so that the triangular marks are aligned with each other. Press the mark "PUSH" on the ink tank firmly until you hear a click.
5. Close the cover. The print head holder will move to the right side.
How to remove the print head / ink tanks
Remove the print head or ink tank properly following the procedure below.
1. Ensure that the printer is powered on.
2. Open the cover by sliding the cover open switch to the right. The print head holder will move to the ink tank replacement position.
Note: When the top cover is opened more than ten minutes, the print head moves to the right side. If this occurs, close the top cover, and open it again.
3. Press the ink tank's tab to remove the ink tank.
Caution: Handle the ink tanks with care so that your clothes and surrounding area do not get soiled.
4. Remove the print head.
4-1. Raise the print head lock lever to remove the print head.
