Preventing Mistransmission of Faxes

Article ID: ART166073 | Date published: | Date last updated: 04/26/2019
 

Description

This article applies to MAXIFY MB printers.

 

Solution

This printer has two functions for preventing the mistransmission of faxes.

Sending Faxes after Dialing Twice (Fax Number Re-entry)

Set FAX number re-entry to ON following the procedure below.

  1. Make sure that printer is turned on.
     

  2. Flick the HOME screen, and then tap Setup.
     

  3. Tap Device settings.
     

  4. Tap FAX settings.
     

  5. Tap Security control.
     

  6. Tap FAX number re-entry.
     

  7. Tap ON.
     

If you send a fax with this function, the following screen is displayed after entering the recipient's fax/telephone number.
 

figure: LCD
 

Enter the recipient's fax/telephone number again.
 

Sending Faxes after Checking Information (Checking Recipient's Information)

Set Check RX FAX information to ON following the procedure below.

 

  1. Make sure that printer is turned on.
     

  2. Flick the HOME screen, and then tap  Setup.
     

  3. Tap  Device settings.
     

  4. Tap FAX settings.
     

  5. Tap Security control.
     

  6. Tap Check RX FAX information.
     

  7. Tap ON.
     

     Important

    • Transmission will be canceled if the printer fails to receive the recipient's fax information or if the received information does not match the fax/telephone number.

 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments