Receiving a fax using DRPD MODE (Distinctive Ring Pattern Detection)

Choose this mode if:

• you only have one telephone line for fax and telephone use.

• you want to receive faxes automatically as well as voice calls.

• you have subscribed to a DRPD (Distinctive Ring Pattern Detection) service with your telephone company. This service assigns two or more telephone numbers with distinctive ring patterns to a single telephone line, allowing you to have a fax number(s) and a telephone number(s) using only one telephone line. Your machine will automatically monitor incoming calls and based on the ring pattern, will let you know if the call is a fax or voice call. Contact your telephone company for more information on this service.
   

You will need to:

• subscribe to a DRP service offered by some telephone companies.

• connect the handset to your machine.
   

• When you receive a fax call: The machine will ring according to the ring pattern you have chosen and receive the fax automatically.
  
   
• When you receive a voice call: The machine will ring according to the ring pattern you have chosen. Pick up the handset to answer the call.
  
   

Your telephone company will assign a distinctive ring pattern to each number when you order the DRP service.

1. Press <Function>.
    
2. Press <Data Registration>.
   
    
3. Press <Set>.
   
    
4. Use or to select [RX SETTINGS].
   
    
5. Press <Set>.
   
    
6. Use or to select [RX MODE].
   
    
7. Press <Set>.
   
    
8. Use or to select [DRPD MODE].
   
    
9. Press <Set>.
   
    
10. Press <Set>.
    
     
11. Use or to select the type of ring pattern that your telephone company assigned to your fax number.

• You can select from the following:

• -NORMAL RING

  -DOUBLE RING

  -SHORT-SHORT-LONG

  -SHORT-LONG-SHORT

  -OTHER RING TYPE

12. Press <Set>.
     
13. Press <Stop/Reset> to return to standby mode.