Article ID: ART159473 |
| |
Date published: 06/09/2015 |
| |
Date last updated: 08/18/2015 |
Description
You can change the print settings such as the page size, media type, or print quality.
Solution
Change Paper Size / Media Type
You can change the print settings such as the paper size and media type when in Copy mode.
- Confirm that the printer is powered on and open the paper output tray.
The illustration shows an MP170.
- Load paper in the auto sheet feeder (ASF) with the short-side down.
- Lift the document cover and place a document on the platen glass.
Note:
* Regardless of the document size, place it with the long-side toward you.
* Place the document face down on the platen glass.
* Align the document with the alignment mark (shown as the arrow) on the lower right corner of the platen glass.
* The machine cannot scan the area within approximately 3 mm of the front and right edges of the platen glass.
< 1 > Alignment Mark
- Gently close the document cover.
- Press the <Paper> button repeatedly until the preferred paper size and type is illuminated. The options are as follows:
8.5" x 11"
Plain Paper
8.5" x 11"
Photo Paper
4" x 6"
Photo Paper
- Press the <+> button to select the number of copies. (The maximum number of copies is 9.)
- To start copying, press the <Color> or <Black> button.
- To cancel copying, press the <Stop/Reset> button.