Layout of the projector
Image size varies depending on the distance between the screen and the projector.

• When adjusting the projection position vertically inlens shift	• When adjusting the projection position horizontally in lens shift

A: Distance from the center of the lens to the bottom edge of the projected image (when lens shift is raised to its highest level)
B: Distance from the center of the lens to the bottom edge of the projected image (when lens shift is lowered to its lowest level)
C: Lens center movement distance (when lens shift is set to maximum left)
D: Lens center movement distance (when lens shift is set to maximum right)
E: Projection distance from the projector to the screen
F: Size of the projected image


All measurements are approximate and may vary from the actual sizes.
We recommend that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it,
so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your installation location.

The projection range for lens shift

a: Maximum horizontal range (H × 23%) b: Maximum vertical range (V × 60%)

 Be sure to stop turning the Lens shift dial when you hear a clicking sound indicating that the knob has reached its limit. Over-turning the knob may cause damage.
 You cannot move the image to both the horizontal and vertical maximum values.