EOS R10: Custom Function Setting Items
Article ID: ART182735 | | | Date published: 05/11/2023 | | | Date last updated: 08/30/2023 |
Description
Solution
Custom Function Setting ItemsYou can customize camera features on the [] tab to suit your shooting preferences. Any settings you change from default values are displayed in blue. C.Fn1Exposure level increments Sets 1/2-stop increments for the shutter speed, aperture value, exposure compensation, AEB, flash exposure compensation, etc.
Note
ISO speed setting increments You can change the manual ISO speed setting increment to a whole stop.
Note
Speed from metering/ISO Auto You can set the ISO speed status after the metering timer ends in cases where, for ISO Auto operation in //// mode, the camera has adjusted the ISO speed during metering or during the metering timer.
Bracketing auto cancel You can specify to cancel AEB and white balance bracketing when the power switch is set to .
Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed.
Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, -, +], the bracketed shots will be taken as shown in the following table.
Note
Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. [Shutter speed/Aperture] applies to or mode. [ISO speed] applies to , , or mode.
Note
C.Fn2Same expo. for new aperture The maximum aperture value may decrease (the lowest f/number may increase) in mode (manual exposure shooting) with ISO speed set manually (except when set to ISO Auto) if you (1) Change lenses, (2) Attach an extender, or (3) Use a zoom lens with a variable maximum aperture value. This function prevents the corresponding underexposure by adjusting ISO speed or shutter speed (Tv value) automatically to maintain the same exposure as before (1), (2), or (3). With [ISO speed/Shutter speed], the ISO speed is automatically adjusted within the ISO speed range. If exposure cannot be maintained by adjusting ISO speed, shutter speed (Tv value) is automatically adjusted.
Caution
Note
AE lock meter. mode after focus For each metering mode, you can specify whether to lock the exposure (AE lock) once subjects are in focus with One-Shot AF. The exposure will be locked while you keep pressing the shutter button halfway. Select metering modes for AE lock and add a checkmark []. Select [OK] to register the setting. Set shutter speed range You can set the shutter speed range for each [: Shutter mode] option. In , , or mode, you can set the shutter speed manually within your specified range. In and mode, or in mode with shutter speed set to [AUTO], the shutter speed is set automatically within your specified range (except for movie recording). Select [OK] to register the setting.
Caution
Set aperture range You can set the aperture value range. In , , , or mode, you can set the aperture value manually within your specified range. In and mode, or in mode with the aperture value set to [AUTO], the aperture value is set automatically within your specified range. Select [OK] to register the setting.
Note
C.Fn3direction to set Tv/Av Dial turning direction when setting the shutter speed and aperture value can be reversed. Reverses the turning direction of the and dials in shooting mode and only the dial in other shooting modes. The direction of the dial in mode matches the direction to set exposure compensation in , , and modes.
direction to set Tv/Av RF lens and mount adapter control ring turning direction when setting the shutter speed and aperture value can be reversed.
Switch / when shooting Functions assigned to the Main dial and Quick control dial can be reversed.
Customize buttons You can assign frequently used functions to camera buttons that are easy for you to use. Different functions, for use when shooting still photos or movies, can be assigned to the same button.
Note
Functions available for customization AF
1: Cannot be assigned as a function available in movie recording. 2: Default in still photo shooting. 4: Default in movie recording. Exposure
1: Cannot be assigned as a function available in movie recording. 3: Default in still photo shooting. 4: Default in movie recording. Image
1: Cannot be assigned as a function available in movie recording. Movies
2: Cannot be assigned as a function available in still photo shooting. 4: Default in movie recording. Operation
1: Cannot be assigned as a function available in movie recording. 3: Default in still photo shooting. 4: Default in movie recording. Note
Customize dials Frequently used functions can be assigned to the , , and dials.
Note
Functions available for dials
Note
Clear customized settings
C.Fn4Add cropping information Adding cropping information displays vertical lines for the aspect ratio specified in shooting, so that you can compose shots as if shooting with a medium- or large-format camera (6×6 cm, 4×5 inch, and so on). When you shoot, instead of cropping images recorded to the card, the camera adds aspect ratio information to images for cropping in the Digital Photo Professional (EOS software). You can import images to Digital Photo Professional on a computer and easily crop images to the aspect ratio set at the time of shooting.
Caution
Note
Default Erase option You can set which option is selected by default in the erase menu (), which is accessed by pressing the button during image playback or during review after shooting. By setting an option other than [Cancel], you can simply press the button to erase images quickly.
Caution
Release shutter w/o lens You can specify whether shooting still photos or movies is possible without a lens attached.
Retract lens on power off You can set whether to retract gear-type STM lenses (such as RF35mm F1.8 Macro IS STM) automatically when the camera's power switch is set to .
Caution
Note
C.Fn5Clear all Custom Func. (C.Fn) Selecting [: Clear all Custom Func. (C.Fn)] clears all Custom Function settings except [Customize buttons] and [Customize dials]. Note
|