Using the Battery Pack (Sold Separately)

You can print outdoors or at locations without a power outlet by installing Battery Pack NB-ES1L (sold separately).
Proper Usage and Handling of the Battery Pack Handling of the Battery Pack (Sold Separately).

Important! Do not use the battery pack in products other than those recommended by Canon.

Installing and Charging the Battery Pack
To charge Battery Pack NB-ES1L, install it in the printer.

1. Remove the battery pack's terminal cover.
   
   When the battery pack is not in use, always store it with its terminal cover on.
   
   
2. Press the battery cover lever down and open the battery cover.
   
   
   
   
3. Install the battery pack in the printer.
   
   
   
   Slide the battery pack into place, in the direction of the arrow (1), and push it in until it clicks into place (2).
   
   To remove the battery pack, slide the battery lever up and pull the battery pack out.
   
   
4. Close the battery cover.
   
   
   
   
5. Attach the power cord to Compact Power Adapter CA-ES100 and plug it into a power outlet.
   
   
   
   
6. Connect the compact power adapter cord to the printer.
   
   
   
   The power button lights orange while charging and turns off once the battery pack is fully charged.
   
   If the power button is pressed and the printer's power turns on while charging the battery pack, charging will stop. Pressing the power button again will turn off the printer and charging will resume.
   
   
7. Disconnect the compact power adapter cord from the printer once charging is complete.
   
   
   
   • The battery pack can be used to power the printer.
     

Battery Status
If the battery power is low, the printer's power button blinks orange. Also, the camera's LCD monitor or printer's LCD monitor display an error message.
Change it with a fully charged battery pack or recharge the battery pack. You can also use the printer's compact power adapter.

Handling of the Battery Pack (Sold Separately)

Checking the Battery Status
The following icons and messages are displayed.

Indication	Description
	There is sufficient battery power.
	To use the printer for a long time, either use fully charged batteries or charge the battery as soon as possible.
	Battery power is low. We recommend recharging the battery pack.
	Operations other than printing are possible.
Recharge the printer battery	Change it with a fully charged battery pack or recharge the battery pack immediately. You can also use the printer's compact power adapter.
	The AC adapter is connected.

Proper Usage and Handling

• If the battery power is low, the finished print may not be ejected into the print receptacle completely.
  If this happens, turn the power off then on again. Paper is automatically output to the print receptacle.
  
• At low temperatures, battery performance is sometimes reduced and the low battery power icon ( , ) may be displayed earlier than usual.
  Battery performance can be recovered by putting the battery pack in your pocket, for example, to warm it up before use.
  
• When warming up the battery pack, do not put key holders or other metal objects in your pocket.
  These may cause the battery pack to short-circuit.
  
• Do not allow key holders or other metal objects to contact (i.e. short-circuit) the "" and "" terminals of the battery (Figure A). When carrying the battery pack or when the battery pack is not used, be sure to attach the terminal cover (Figure B).
  Otherwise, the battery pack might become damaged.
  
  
  
• When storing a battery pack, you are recommended to use it in the printer until it is completely discharged and to store it in an indoor location with low relative humidity and between the temperatures of 0 - 30 °C (32 - 86 °F).
  Storing a fully charged battery pack for long periods of time (about 1 year) can shorten its lifecycle or affect performance. If you do not use the battery pack for long periods of time, charge it fully and discharge it fully in the printer at least once a year before returning it to storage.
  
  

Charging the Battery Pack

• This is a lithium ion battery pack so there is no need to completely use or discharge it before recharging.
  It can be charged at any charge state.
  
• It takes approximately 2 hours 55 minutes to bring a depleted battery pack to a full charge state (based on standard Canon testing criteria).
  • We recommend recharging the battery pack in a temperature of 5 - 40 °C (41 - 104 °F).
  • The charging time varies according to the ambient temperature and charge state.
    
• You are advised to charge the battery on the day of use, or one day before, to ensure a full charge.
  Even charged battery packs continue to discharge naturally.
  
• If the usable time of a battery pack diminishes substantially even when fully charged, it should be replaced.

Battery Pack NB-ES1L Specifications

Type:	Lithium Ion battery
Nominal Voltage	DC 22.2 V
Nominal Capacity	2000 mAh
Charge Cycles	Approx. 300
Number of prints*	Postcard size paper: 50 sheets or more
	L size paper: 50 sheets or more
	Card size paper: 72 sheets or more
Operating Temp	5-40 °C (41-104°F)
Dimensions	5.7 x 2.4 x 0.9 in.
Weight	Approx. 11.8 oz

*Test Conditions: When using color cartridge, normal temperature (23 °C/73 °F), Canon images, continuous print
The above data may vary according to the printing environment and the image to be printed.