Procedure for using Manual Mode PowerShot A610 and A620

Article ID: ART155599 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Procedure for using Manual Mode PowerShot A610 and A620

Solution

M: Shooting in Manual Mode - PowerShot A610 & A620

You can manually set the shutter speed and aperture to achieve a particular effect.

  • When you press the shutter button halfway, the difference between the standard exposure* , and the selected exposure appears on the LCD monitor. If the difference is more than +/- 2 stops, "-2" or "+2" appears in red.

* Standard exposure levels are calculated by measuring light according to the currently selected metering mode.

  1. Turn on the camera, and set the mode switch to .

  2. Turn the shooting mode dial to "M".
    -
    The shutter speed and aperture value appears on the LCD monitor if it is on.



  3. Select a shutter speed using the or button.
    -
    If you wish to change the aperture, press the button, then adjust the value using the or button.



  4. Shoot the image.

When you press the shutter button halfway, a number indicating the difference between the standard exposure*  and the selected exposure appears on the LCD monitor. If the difference is more than 2 steps, '-2' or '+2' appears in red.

* The standard exposure is calculated by the AE function according to the selected metering mode.

  • If you wish to change the exposure, select the shutter speed or the aperture with the button and change the value using the left or right button.
  • If the zoom is adjusted after these values are set, the aperture value may change in accordance with the zoom position.
  • The LCD monitor's brightness matches the selected shutter speed and aperture value. When you select a fast shutter speed or shoot a subject in a dark place and set the flash to (Red-Eye Reduction, Flash On) or (Flash On) the LCD monitor will always light up.

The aperture value and shutter speed change according to the zoom state as follows.

Lens Zoom Position

Aperture Value

Shutter Speed (seconds)

Max. Wide Angle

F2.8 - 3.2

15 - 1/1250

F3.5 - 4.0

15 - 1/1600

F4.5

15 - 1/2000

F5.0 - 8.0*1

15 - 1/2500

Max. Telephoto

F4.1 - 4.5

15 - 1/1250

F5.0 - 6.3

15 - 1/1600

F7.1 ? 8.0*2

*1 In , an aperture value of F11 at maximum wide angle may be possible depending on the shooting conditions.

*2 In , an aperture value of F16 at maximum telephoto may be possible depending on the shooting conditions.

Note: The fastest shutter speed for flash synchronization is 1/500 second. The camera automatically resets the shutter speed to 1/500 second if a faster speed is selected.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments