Follow this procedure to switch the type of black ink.
Article ID: ART105540
|
Date published: 05/11/2015
|
Date last updated: 08/15/2015
Description
This printer employs two types of black ink (Photo and Matte). Follow this procedure to switch the type of black ink.
Solution
This printer employs two types of black ink, either Photo Black Ink or Matte Black Ink, to best match the media type and the requirements of the print job.
Follow this procedure to switch the type of black ink.
Remove printed and other media from the platen.
On the operation panel, perform [ChangeBkInkType].
After the processing to drain the ink is finished, remove the black ink tank.
Install the black ink tank that you want to use.
Confirm the installed ink tank.
Align the printhead.
Performing [ChangeBkInkType] consumes about 45 ml of black ink and approximately 15 ml of each color ink. Before you switch the black ink tanks, confirm that there is sufficient ink in the tank. You should always use new ink tanks as replacements.
The Photo Black and Matte Black ink tanks cannot be installed at the same time.
You cannot execute [ChangeBlkInkType] once the [MTCart Full Soon] or [Replace MT-Cart] appears. You can execute [ChangeBlkInkType] after the maintenance cartridge has been replaced.
