Ask a Question

Memory Reception (L120)

Article ID: ART155339 | Date published: 06/09/2015 | Date last updated: 01/21/2016
 

Description

Memory Reception

Solution

Memory Reception

The machine automatically receives faxes in memory when printing is disabled under certain conditions (i.e., toner or paper has run out). You can also set the machine to receive faxes in memory during a certain time period of your choice, with password protection if required.

  1. Press <Menu>.

     
  2. Use <Up/Down> to select [RX SETTING?], then press <Set>.

     
  3. Use <Up/Down> to select [1 MEMORY RX MODE?], then press <Set>.

     
  4. Use <Left/Right> to select [ON], then press <Set>.

     
  5. Use the numeric buttons to enter the time (in 24-hour format) when memory reception starts, then press <Set>.

    If you do not want to set the time, press <Set> without entering any number and skip to step 7.


     
  6. Use the numeric buttons to enter the time (in 24-hour format) when memory reception ends, then press <Set>.


     
  7. Use the numeric buttons to enter a four-digit password, then press <Set>.

    If no password is required, press <Set> without entering any number.


     
  8. Press <Stop/Reset> to return to standby mode.
 

Releasing Memory Reception
  1. Press <Menu>.

     
  2. Use <Up/Down> to select [RX SETTING?], then press <Set>.

     
  3. Use <Up/Down> to select [1 MEMORY RX MODE?], then press <Set>.

     
  4. Use <Left/Right> to select [OFF], then press <Set>.

     
  5. If required, use the numeric buttons to enter the four-digit password, then press <Set>.

    If no password is required, skip to step 6.


     
  6. Press <Stop/Reset> to return to standby mode.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments