Automated Playback (Slide Show)

All images or a selection of images on a CF card can be displayed one-by-one in an automated slide show.

Slide show image settings are based on DPOF standards.

Selecting Images for Slide Shows

Adjusting the Play Time and Repeat Settings

Starting a Slide Show

1. In the [ (Play)] menu, select [Slide Show] and press the <SET> button.
   
   
   
   
2. Select [Program] using the or arrows and select between [All images] or one of [Show 1]-[Show 3] using the or arrows.
   
   
   
   
3. Select [Start] using the or arrows and press the <SET> button. The show will start and automatically stop when the show is done.
   
   Pausing and Resuming a Slide Show
   Press the <SET> button to pause the show. Press it again to resume.
   
   Fast Forward/Rewinding a Slide Show
   Turn the main dial or use the or arrows to move to the previous or next image.
   
   Stopping a Slide Show
   Press the <MENU> button during a slide show to stop it and display the slide show menu.
   
   
4. When the slide show is over, press the <MENU> button. The slide show appears again. Press the <MENU> button again to close the menu.
   
   

Movie images play for the length of time that they were recorded regardless of the time set in the slide show settings. The power saving function is disabled while slide show plays on the camera.

Selecting Images for Slide Shows

You can mark images for inclusion in slide shows 1-3. Up to 998 images may be marked per slide show. Images display in the order of their selection.

1. In the [ (Play)] menu select [Slide Show]
   
   
   
   
2. Select [Program] using the or arrows and select [Show 1], [Show 2] or [Show 3] using the or arrows.
   
   
   
   A checkmark ( ) will appear beside a show already containing images.
   
   
3. Choose [Select] using the and or arrows and press the <SET> button.
   
   
4. Mark images to include in the show.
   
   Single Image Playback
   
   
   
   
   • Move between images using the main dial or the or arrows and mark or remove marks from images using the or arrows.
   • The selection number and a check mark appear at the bottom of selected images.
     
     
   Index Playback
   
   
   
   
   • Press the button to switch to index playback (3 images).
   • Select an image using the main dial or the or arrows and mark or remove marks from images using the or arrows.
   • The selection number and a check mark appear at the bottom of selected images.
   • After you press the <SET> button, you can select all the images by selecting [Mark All] using the or arrows and pressing the <SET> button again. You can deselect all the images by selecting [Clear all].
   • You can select images using the or arrows and change the setting using the or arrows after [Mark All] or [Clear all] has been selected.
     
     
5. Press the <MENU> button. The image selection screen will close.
   
   

Adjusting the Play Time and Repeat Settings

1. In the [ (Play)] menu, select [Slide Show] and press the <SET> button.
   
   
   
   
2. Select [Set up] using the or arrow and press the <SET> button.
   
   
   
   
3. Select [Play Time] or [Repeat] using the or arrow.
   
   
4. Select a setting using the or arrow.
   
   
   
   
5. Press the <MENU> button. The setup menu closes.
   
   

The display interval may vary somewhat for some images. Slide shows can be easily edited on a computer with the supplied ZoomBrowser EX or ImageBrowser software programs.