Ask a Question

Displaying the Electronic Level on the LCD Monitor

Article ID: ART136763 | Date published: 05/13/2015 | Date last updated: 10/22/2015
 

Description

Displaying the Electronic Level on the LCD Monitor

Solution

 Displaying the Electronic Level on the LCD Monitor

1 Press the <INFO> button.

  • Each time you press the <INFO> button, the screen display will change.

  • Display the electronic level.

  • If the electronic level does not appear, set display options] so that the electronic level can be displayed

2 Check the camera’s tilt.

  • The horizontal and vertical tilt are displayed in 1° increments.

  • When the red line turns green, it indicates that the tilt is corrected

 

  • Even when the tilt is corrected, there may be a margin of error of ±1°.

  • If the camera is very tilted, the electronic level’s margin of error will be bigger.

You can also use the procedure above to display the electronic level during Live View shooting and before shooting a movie. Note that the electronic level cannot be displayed during movie shooting. (The electronic level will disappear when you start shooting a movie.)


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments