Ask a Question

Detailed settings in receive mode <FAX/TEL> (MF6595cx/MF6595/MF6590 Only)

Article ID: ART101041 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Solution

When you select <FaxTel> in <RX MODE>, you can specify optional settings as follows:
1. Press [Additional Functions].

2. Press [<-] or [+>] to select <FAX SETTINGS>, then press [OK].

3. Press [<-] or [+>] to select <RX SETTINGS>, then press [OK].

4. Press [<-] or [+>] to select <FAX/TEL OPT.SET>, then press [OK].

5. For <RING START TIME>, use [<-], [+>], or the numeric keys to specify the duration 0 to 30 seconds) for which the machine attempts to detect the fax tone before it starts ringing, then press [OK].

  • If the machine receives a fax, the machine does not ring and switches to the receive mode automatically.
  • The default setting is <6SEC>.
6. For <F/T RING TIME>, use [<-], [+>], or the numeric keys to specify the duration (15 to 300 seconds) of ringing, then press [OK].
  • The default setting is <15SEC>.
7. For <F/T SWITCH ACTION>, press [<-] or [+>] to select the action the machine will take after the ringing ends, then press [OK].
  • The default setting is <RECEIVE>.
  • <RECEIVE>: Receives a fax.
  • <DISCONNECT>: Disconnects the call.
  • The default setting is <RECEIVE>.<RECEIVE>: Receives a fax.<DISCONNECT>: Disconnects the call.
8. Press [Stop] to return to the standby mode.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments