The machine can print a TX (transmission) report (TX REPORT or ERROR TX REPORT) after sending a document. You can set it to print every time it sends a document, or only when an error occurs. Alternatively, you can disable printing the report. By default, the machine is set to print a TX report only when an error occurs.
The recipient's fax/telephone number (RECIPIENT ADDRESS) is not shown for the manually sent faxes.
The machine does not print a TX report when faxing the documents from your computer.
Press <Menu>.
Press <(-)> or <(+)> to select [FAX SETTINGS], then press <Set>.
Press <(-)> or <(+)> to select [REPORT SETTINGS], then press <Set>.
Press <(-)> or <(+)> to select [TX REPORT], then press <Set>.
Press << (-)> or <(+)> to select the setting you want, then press <Set>. You can select from the following:
[PRINT ERROR ONLY] to print a report only when a transmission error occurs
[OUTPUT YES] to print a report every time you send a document
[OUTPUT NO] to disable printing the report
If you selected [PRINT ERROR ONLY] or [OUTPUT YES]:
You can set whether to print the first page of the fax under the report. Press <(-)> or <(+)> to select [OFF] or [ON], then press <Set>. -[OFF] to print no first page -[ON] to print the first page
Press <Stop/Reset> to return to the standby display.
(-)> or <
(+)> to select [FAX SETTINGS], then press <Set>.
If you selected [PRINT ERROR ONLY] or [OUTPUT YES]: