Installing the Printer Driver (USB)-Windows NT 4.0/2000/XP/Server 2003

 Only the D800 series is compatible with Windows Server 2003. The D600/700 series are not compatible with Windows Server 2003.

The following is the installation procedure for plug and play using a USB port under Windows 2000.

Before you install the software, make sure you do the following:

• Connect the machine to your computer.
• Turn on the machine
• Start up Windows 2000/XP/Server 2003.

 Using a USB Port (USB Cable)

• In order to use the printer via USB, your computer must be equipped with a USB port and it is necessary that its operation is approved by the manufacturer.
• USB is not available for Windows NT 4.0.

1. Log on as an Administrator. The full control access right for the printer is necessary for the installation of CAPT.
   
   
   

2. Plug and Play will activate and the USB class driver and "USB Printing Support" is automatically detected and installed.
    
   
   

3. The ]Found New Hardware Wizard] dialog box appears. Click [Next>].
   Select [Search for a suitable driver for my device (recommended)] in the [Found New Hardware Wizard] and click [Next>].
    
   "Unknown" may be displayed as the name of the device.
   
   

4. Select [Specify a location] and click [Next>].
    
   
   

5. The [Found New Hardware Wizard] dialog box appears. Click [Browse...] to select the driver in the language that you want to install. For example, if your CD-ROM drive is drive "D:", browse to "D:\English\Win2000], then click [OK].
   
   If you use Windows XP/Server 2003, and your CD-ROM drive is "D:", browse to "D:\English\WinXP" (For Server 2003 the path name is the same as for Windows XP.).
    
   Click [Next>] on [Driver Files Search Results].
   
   
   

6. When the installation is complete, the following dialog box appears. Click [OK] to close the dialog box. Click [Finish] on the [Found New Hardware Wizard].