Ask a Question

Specifying the Imprinter Printing Positon (DR-G1130/G1100)

Article ID: ART139560 | Date published: 05/13/2015 | Date last updated: 11/02/2015
 

Description

Manually specify the printing position in the horizontal direction of the document.

Solution

Specifying the Printing Position

Manually specify the printing position in the horizontal direction of the document.
To do this, move the carriage left or right and align it with one of the 15 positioning holes.

  1. Roughly align the right edge of the lock lever with the desired printing position.
     
     
    - If you do not feel it click in, the carriage is not aligned correctly with a positioning hole. Always move the carriage to a position where it clicks in.
    - The imprinter cover will not close unless the carriage is correctly aligned with a positioning hole. If it will not close, check the position of the carriage.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments