Borderless Copying

There are two ways (normal / high speed) to make copies.
"Fit to Page" function allows you to make borderless copies of photos.

Normal copies

Use Normal copying for photo copy quality or documents that contain text and photos.

1. Confirm that the printer is powered on and open the paper output tray.
   
   
   The illustration shows an MP170.
   
   
2. Load paper in the auto sheet feeder (ASF) with the short-side down.
   
   Note: Load the exact number of pages in the ASF to make 10 to 19 copies.
   
   
3. Lift the document cover and place a document on the platen glass.
   
   Note:
   * Regardless of the document size, place it with the long-side toward you.
   * Place the document face down on the platen glass.
   * Align the document with the alignment mark (shown as the arrow) on the lower right corner of the platen glass.
   * The machine cannot scan the area within approximately 3 mm of the front and right edges of the platen glass.
   
   
   
   < 1 > Alignment Mark
   
   
4. Gently close the document cover.
   
   
5. Press the <Paper> button repeatedly until the preferred paper size and type is illuminated. The options are as follows:
   
   8.5" x 11"
   Plain Paper
   
   8.5" x 11"
   Photo Paper
   
   4" x 6"
   Photo Paper
   
   
6. Press the <+> button repeatedly to select the number of copies. (The maximum number of copies is 20.)
   
7. 1. When making 20 copies, press the <+> button repeatedly to select [F]. The letter F will display after number 9.
      
   2. When making 10 to 19 copies, press the <+> button repeatedly to select [F] and then load the exact number of pages in the ASF.
      
      For example, to make 15 copies, load 15 blank pages in the ASF.
      
      Note: The number of copies can be set from 1 to 9 and 20 (F is the selection). So, it is important to load the exact number of sheets in the ASF when making 10 to 19 copies.
      
   3. After copies from 10 to 19 are completed, the below error will appear. This is a normal function for this printer when making this number of copies.
      
      
      
      
8. To start copying, press the <Color> or <Black> button.
   
   
9. To cancel copying, press the <Stop/Reset> button.

High speed copies

High speed copying is suitable for text-only documents.

1. Confirm that the printer is powered on and open the paper output tray.
   
   
   The illustration shows an MP170.
   
   
2. Load paper in the auto sheet feeder (ASF) with the short-side down.
   
   
3. Lift the document cover and place a document on the platen glass.
   
   Note:
   * Regardless of the document size, place it with the long-side toward you.
   * Place the document face down on the platen glass.
   * Align the document with the alignment mark (shown as the arrow) on the lower right corner of the platen glass.
   * The machine cannot scan the area within approximately 3 mm of the front and right edges of the platen glass.
   
   
   
   < 1 > Alignment Mark
   
   
4. Gently close the document cover.
   
   
5. Press the <Paper> button to select [8.5" x 11" Plain Paper].
   
   
6. Press the <+> button repeatedly to select the number of copies. (The maximum number of copies is 20.)
   
7. 1. When making 20 copies, press the <+> button repeatedly to select [F]. The letter F will display after number 9.
      
   2. When making 10 to 19 copies, press the <+> button repeatedly to select [F] and then load the exact number of pages in the ASF.
      
      For example, to make 15 copies, load 15 blank pages in the ASF.
      
      Note: The number of copies can be set from 1 to 9 and 20 (F is the selection). So, it is important to load the exact number of sheets in the ASF when making 10 to 19 copies.
      
   3. After copies from 10 to 19 are completed, the below error will appear. This is a normal function for this printer when making this number of copies.
      
      
      
      
8. Press and hold down the <Color> or <Black> button for 2 seconds or more.
   
   
9. When the number of copies in the LED disappears and reappears, release the button. The machine starts high speed copying.
   
   Note : High speed copying is suitable for text-only documents. If the quality is not as good as expected, try normal copying.
   
   
10. To cancel copying, press the <Stop/Reset> button.
    

Fit-to-Page

This feature enables you to copy images in the size you set by reducing or enlarging them automatically. The size may not be detected properly dependent on the document type. In this case, make a copy through the software using MP Navigator.

1. Confirm that the printer is powered on and open the paper output tray.
   
   
   The illustration shows an MP170.
   
   
2. Load paper in the auto sheet feeder (ASF) with the short-side down.
   
   
3. Lift the document cover and place a document on the platen glass.
   
   Note:
   * Regardless of the document size, place it with the long-side toward you.
   * Place the document face down on the platen glass.
   * Align the document with the alignment mark (shown as the arrow) on the lower right corner of the platen glass.
   * The machine cannot scan the area within approximately 3 mm of the front and right edges of the platen glass.
   
   
   
   < 1 > Alignment Mark
   
   
4. Gently close the document cover.
   
   
5. Press the <Paper> button to select [8.5" x 11" Photo Paper] or [4" x 6" Photo Paper].
   
   Note:
   * If you select Photo Paper, the machine copies the entire image without borders. Some cropping may occur.
   * If you select 8.5" x 11" Plain Paper, making high speed copies is possible.
   
   
6. Press the <+> button repeatedly to select the number of copies. (The maximum number of copies is 20.)
   
7. 1. When making 20 copies, press the <+> button repeatedly to select [F]. The letter F will display after number 9.
      
   2. When making 10 to 19 copies, press the <+> button repeatedly to select [F] and then load the exact number of pages in the ASF.
      
      For example, to make 15 copies, load 15 blank pages in the ASF.
      
      Note: The number of copies can be set from 1 to 9 and 20 (F is the selection). So, it is important to load the exact number of sheets in the ASF when making 10 to 19 copies.
      
   3. After copies from 10 to 19 are completed, the below error will appear. This is a normal function for this printer when making this number of copies.
      
      
      
      
8. Press the <Fit to Page> button to light the Fit-to-Page lamp.
   
   Note: To cancel the Fit-to-Page copying, press the Fit to Page button again.
   
   
9. To starts Fit-to-Page copying, press the <Color> or <Black> button.
   
   
10. To cancel copying, press the <Stop/Rest> button.