Compatible ink tanks

Replacement ink tanks in 330 ml (11.24 fl oz) and 700 ml (23.7 fl oz) capacities are supported.

Precautions when handling ink tanks

Take the following precautions when handling ink tanks.

Attention:

• For safety, keep ink tanks out of the reach of children.
• If ink is accidentally ingested, contact a physician immediately.
• There may be ink around the ink supply section of ink tanks you removed. Handle ink tanks carefully during replacement. The ink may stain clothing.

Important:

• Do not install used ink tanks in another model of printer.
  This will prevent correct ink level detection, which may damage the printer or cause other problems.
• We recommend using up an Ink Tank in the course of printing within six months after breaking the seal. Printing quality may be affected if you use older ink tanks.
• Do not leave the printer without ink tanks installed for extended periods (a month or more). Residual ink may become clogged inside the printer and affect printing quality.

---

Make sure the printer is ready for Ink Tank replacement

You can replace ink tanks if the Display Screen advises you to check the amount of ink left or replace ink tanks.

If a message requests you to replace an ink tank, press the OK button. In this case, you can skip the step "Access the menu for ink tank replacement". Follow the instructions in "Remove the ink tanks".

Important:

• Do not remove an Ink Tank during initialization immediately after turning on the printer, or during printhead cleaning.

Note:

• Ink Tank replacement is possible even when print jobs are being canceled or if paper is being advanced.
  

---

Access the menu for Ink Tank replacement

1. On the Tab Selection screen of the Control Panel, press or to select the Ink tab .

Note:

• If the Tab Selection screen is not displayed, press the Menu button.

2. Press the OK button.
The Ink Menu is displayed.

3. Press or to select Rep. Ink Tank, and then press the OK button.
A message on the Display Screen requests you to open the Ink Tank Cover. Remove the Ink Tank at this point.

---

Remove the Ink Tank (330ml)

1.Open the Ink Tank Cover of the tank for replacement and check the Ink Lamps.
The Ink Lamp flashes quickly if there is no ink left.

Caution:

• Avoid hitting the printer when replacing an Ink Tank. Handle the printer gently when replacing tanks.

2. Lift the stopper (a) of the Ink Tank Lock Lever for the color to replace. Lift the Ink Tank Lock Lever until it stops, and then push it down to the front.

Important:

• Push the Ink Tank Lock Lever down until it locks.
• Make sure the Ink Tank Lock Lever does not return to the original position.

3. Hold the Ink Tank by the grips (a) and remove it. Press the OK button.

Caution:

• If there is still ink in the Ink Tank you removed, store it with the ink holes (a) facing up. Otherwise, ink may leak and cause stains. Put the Ink Tank in a plastic bag and seal it.
  

  

  
  

Note:

• Dispose of used ink tanks according to local regulations.
  

---

Remove the Ink Tank (700ml)

1.Open the Ink Tank Cover of the tank for replacement and check the Ink Lamps.
The Ink Lamp flashes quickly if there is no ink left.

Caution:

• Avoid hitting the printer when replacing an Ink Tank. Handle the printer gently when replacing tanks.

2. Lift the stopper (a) of the Ink Tank Lock Lever for the color to replace. Lift the Ink Tank Lock Lever until it stops, and then push it down to the front.

Important:

• Push the Ink Tank Lock Lever down until it locks.
• Make sure the Ink Tank Lock Lever does not return to the original position.

3. Hold the Ink Tank by the grips (a) and remove it. Press the OK button.

Caution:

• If there is still ink in the Ink Tank you removed, store it with the ink holes (a) facing up. Otherwise, ink may leak and cause stains. Put the Ink Tank in a plastic bag and seal it.
  

  

  
  

Note:

• Dispose of used ink tanks according to local regulations.
  

---

Load the ink tank (330 ml)

1. Before opening the pouch, tilt the Ink Tank to the left and right gently seven or eight times.

Caution:

• Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.

Important:

• If you do not agitate the Ink Tank, the ink may sediment, which may affect printing quality.
  
  

2. Open the pouch and remove the Ink Tank.

Caution:

• Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank, and affect printing quality.
  

3. Press the OK button and insert the Ink Tank into the holder with the ink holes facing down, as shown.

Important:

• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.

  If the Ink Tank does not fit in the holder, do not force it into the holder. Make sure the color of the Ink Tank Lock Lever matches the color of the Ink Tank, and check the orientation of the Ink Tank before reloading it.
  
  

4. Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place.

5. Make sure the Ink Lamp is lit in red.

Note:

• If the Ink Lamp is not lit in red, reload the tank.
• Ink lamps flash when there is little ink left.
  
  

6. Close the Ink Tank Cover.

---

Load the ink tank (700 ml)

1. Before opening the pouch, hold the Ink Tank with hands and tilt it to the left and right as shown, shaking gently seven or eight times.

Caution:

• 700 ml ink tanks are heavy, so use your whole arm to agitate it instead of just your wrist.
• Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.

Important:

• If you do not agitate the Ink Tank, the ink may sediment, which may affect printing quality.
  
  

2. Open the pouch and remove the Ink Tank.

Caution:

• Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank, and affect printing quality.
  

3. Press the OK button and insert the Ink Tank into the holder with the ink holes facing down, as shown.

Important:

• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.

  If the Ink Tank does not fit in the holder, do not force it into the holder. Make sure the color of the Ink Tank Lock Lever matches the color of the Ink Tank, and check the orientation of the Ink Tank before reloading it.
  
  

4. Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place.

5. Make sure the Ink Lamp is lit in red.

Note:

• If the Ink Lamp is not lit in red, reload the tank.
• Ink lamps flash when there is little ink left.
  
  

6. Close the Ink Tank Cover.

Important:

• After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover cannot close, some Ink Tank Lock Lever may not be closed completely. Make sure all ink tank lock levers are fully closed.
• To close the Ink Tank Cover when no Ink Tank is installed (as when moving the printer), push the release lever (a) as shown while returning the Ink Tank Lock Lever to the original position.