Turning the Power ON

The power of the scanner can be turned ON and OFF iwth the power button on the front of the scanner.

1. Make sure that the scanner and computer are connected.

2. Press the power button.
   
    The power button lights blue when the power turns ON.

    Hint
    A balloon message such as shown below appears on the task bar. If you wait a while, automatic scanner recognition will end and the scanner will become ready to use.

    When the scanner is properly connected to the computer, the CaptureOnTouch icon appears on the taskbar.

    If the CaptureOnTouch icon appears with a exclamation mark in a yellow circle, the scanner is not properly connected to the computer. Check the status of the power switch and USB cable.

 Turning the Power OFF

Press and hold the power button until the indicator goes out.

IMPORTANT
- After turning the scanner off, wait at least 10 seconds before turning it back on.
- If you will not be using the scanner for an extended period, you should disconnect the power cord from the AC outlet for safety.

Hint
The scanner's auto power off setting is enabled by default, and the scanner will turn off automatically if it is not operated for 4 hours.