Problems Receiving Faxes
Article ID: ART139433 | | | Date published: 05/13/2015 | | | Date last updated: 12/09/2015 |
Description
Solution
Problems Receiving Faxes ID:
8201735100_
EN_
1
|
|
Issue |
|
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
Cannot Receive a Fax, Cannot Print a Fax |
See Also | |
Cause |
Check 1: Is the power turned on? |
Summary |
(A) ON button
(B) FAX Memory lamp
|
See Also | |
Cause |
Check 2: Is the machine's memory full? |
Summary |
Print the received faxes stored in the machine's memory or save them on the USB flash drive, delete them from the machine's memory, and have the sender resend the faxes.
|
See Also | Document Stored in Machine's Memory
|
Cause |
Check 3: Does an error occur during reception? |
Summary |
|
See Also | |
Cause |
Check 4: Is the telephone line cable connected to the external device jack? |
Summary |
Reconnect it to the telephone line jack.
|
See Also | Setting Up the FAX
|
See Also | Connecting the Telephone Line
|
Cause |
Check 5: Is a different size of paper from that specified by Page size loaded? |
Summary |
If a different size of paper from that specified by Page size is loaded for printing faxes, the received faxes will not be printed and will be stored in the machine's memory (Memory Reception). Load the same size of paper as that specified by Page size, then press the OK button on the machine.
|
See Also | |
Cause |
Check 6: Is Page size set to other than A4, Letter, or Legal? |
Summary |
If Page size is set to other than A4, Letter, or Legal, the received fax will not be printed and will be stored in the machine's memory (Memory Reception). Set Page size to A4, Letter, or Legal.
|
See Also | |
Cause |
Check 7: Is Type set to other than Plain paper? |
Summary |
If Type is set to other than Plain paper, the received fax will not be printed and will be stored in the machine's memory (Memory Reception). Set Type to Plain paper.
|
See Also | |
Cause |
Check 8: Is paper loaded? |
Summary |
If paper is not loaded, received faxes will be stored in machine's memory without being printed. Load paper, then press the OK button.
|
See Also | |
Cause |
Check 9: Is the amount of remaining ink sufficient to print a fax? |
Summary |
If the amount of remaining ink is insufficient to print, received faxes will be stored in the machine's memory without being printed (Memory Reception). Replace the FINE cartridge, then print the faxes in the machine's memory.
|
See Also | |
Cause |
Check 10: Is the machine set to the appropriate receive mode? |
Summary |
Check the receive mode setting and change it to a mode suited to your connection if necessary.
|
See Also | |
Cause |
Check 11: Is FAX reception reject set to ON? |
Summary |
Select [ OFF ] for [ FAX reception reject in Security control ] under [ FAX settings ].
|
See Also | |
Cause |
Check 12: Are there setting items set Reject in Caller rejection? |
Summary |
If you select Reject for any setting items in Caller rejection in Security control under FAX settings, the machine rejects calls for setting item selected Reject.
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
Machine Does Not Switch Automatically between Voice and Fax Calls |
See Also | |
Cause |
Check: Is the receive mode set to FAX only mode? |
Summary |
If FAX only mode is selected for Receive mode settings, there will be no automatic switching between voice and fax calls.
Set the receive mode to TEL priority mode, DRPD*1, or Network switch*2.
If the receive mode is TEL priority mode and an answering machine is connected to the machine, check whether a proper message is played back when the answering machine answers.
*1 This setting is available only in the US and Canada.
*2 This setting may not be available depending on the country or region of purchase.
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
Quality of Received Fax is Poor |
See Also | |
Cause |
Check 1: Check the scan settings of the sender's fax machine |
Summary |
Ask the sender to adjust the scan settings of the fax machine.
|
See Also | |
Cause |
Check 2: Is ECM RX set to OFF? |
Summary |
Select [ ON ] for [ ECM RX ] in [ Adv. communication settings ] in [ Advanced FAX settings ] under [ FAX settings ].
If [ ECM RX ] is enabled, the sender's fax machine resends the fax after correcting errors automatically.
|
See Also | |
Cause |
Check 3: Is the sender's original document or scanning area of the sender's fax machine dirty? |
Summary |
The image quality of the fax is mainly determined by the sender's fax machine. Contact the sender and ask the sender to check whether the scanning area of the fax machine is dirty.
|
See Also | |
Cause |
Check 4: Is ECM transmission/reception enabled although the line/connection is poor, or is the sender's fax machine compatible with ECM? |
Summary |
If the sender's or recipient's fax machine is not compatible with ECM, the fax will be sent/received without automatic error correction.
|
See Also | |
Cause |
Check 5: Did you confirm the paper and print quality settings? |
Summary |
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
Check: Is ECM RX set to OFF? |
Summary |
If [ OFF ] is select for [ ECM RX ] in [ Adv. communication settings ] in [ Advanced FAX settings ] under [ FAX settings ], the machine cannot receive color faxes. The machine will disconnect the telephone line or receive color faxes in black & white according to the setting of the sender's fax machine.
Set [ ECM RX ] to [ ON ].
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
|
See Also | |
Cause |
|
Summary |
Errors Often Occur When You Receive a Fax |
See Also | |
Cause |
Check 1: Check the telephone line condition or the connection |
Summary |
If the telephone line or connection is poor, reducing the reception start speed may correct the error.
Reduce the reception start speed on [ RX start speed ] in [ Adv. communication settings ] in [ Advanced FAX settings under FAX settings ].
|
See Also | |
Cause |
Check 2: Is the sender's fax machine operating normally? |
Summary |
Contact the sender and ask the sender to check whether the fax machine is operating normally.
|
See Also |