Installing Driver/Software (USB Connection) (Windows)
important:
User rights for logging on to Windows
- Log on as a user with administrative rights.
When installing via USB connection
- Connect the USB cable after the software installation.
- Ensure that the power of the machine is turned ON when connecting the USB cable.
Install this software to use the machine.
There are two methods for installing the software. Normally, install it with [Easy Installation].
To install the following software and manuals that cannot be installed with [Easy Installation], select [Custom Installation].
- Presto! PageManager
- e-Manual
Installing with [Easy Installation]
1. Insert the User Software CD-ROM.
2. Click [Easy Installation].
note:
If the above dialog box does not appear
- If you cannot display the top screen when setting CD-ROM, perform the following operations.
* The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name may differ depending on the computer you are using.
1. From the [Start] menu, select [Run].
2. Enter "D:\Minst.exe", and then click [OK].
1. Enter "D:\Minst.exe" in [Search programs and files] (or [Start Search]) under the [Start] menu.
2. Press the [ENTER] key on the keyboard.
If a language selection screen is displayed before the CD-ROM setup screen
- Select a language and then click [Next].
3. When the following screen appears, select the connection to a computer.
Click [Next] in [Connect Printer Directly to Computer].
4. Click [Install].
5. Read the contents of the License Agreement, and then click [Yes].
6. Click [Next].
7. Click [Exit].
Next, installation of MF Toolbox starts.
8. Click [Start].
9. Click [Exit].
10. Check that [ 
] is selected in [Install], and then click [Next].
11. Restart your computer.
(1) Select the [Restart Computer Now (Recommended)] check box.
(2) Click [Restart].
* The CD-ROM may be removed once this screen appears.
12. Remove the cap (A) on the USB port of the machine.
Remove the cap by pulling out the string.
13. Connect the USB cable.
- Flat end (A): Connect to the USB port on the computer.
- Square end (B): Connect to the USB port on the machine.
note:
When a dialog box is displayed
- Follow the on-screen instructions and complete the installation.
Checking the installation results
Check that the MF drivers and MF Toolbox are installed correctly.
Check that the icons for the installed software are added as follows.
| Software |
Location |
Icon |
| Printer driver |
[Devices and Printers] folder |
 |
| Fax driver |
[Devices and Printers] folder |
 |
| Scanner driver |
[Scanners and Cameras] or [Scanners and Cameras Properties] folder |
 |
| MF Toolbox |
Desktop |
 |
Installing with [Custom Installation]
1. Insert the User Software CD-ROM.
2. Click [Custom Installation].
note:
If the above dialog box does not appear
- If you cannot display the top screen when setting CD-ROM, perform the following operations.
* The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name may differ depending on the computer you are using.
1. From the [Start] menu, select [Run].
2. Enter "D:\Minst.exe", and then click [OK].
1. Enter "D:\Minst.exe" in [Search programs and files] (or [Start Search]) under the [Start] menu.
2. Press the [ENTER] key on the keyboard.
If a language selection screen is displayed before the CD-ROM setup screen
- Select a language and then click [Next].
3. When the following screen appears, select the connection method to a computer.
Click [Next] in [Connect Printer Directly to Computer].
4. Select the check box for the software to be installed, and then click [Install].
5. Read the contents of the License Agreement, and then click [Yes].
6. Click [Next].
7. Click [Exit].
Next, installation of MF Toolbox starts.
* In the following case, MF Toolbox is not installed. Proceed to Step 10.
- If you cleared the [MF Toolbox] check box in Step 4
8. Click [Next].
The screens for specifying a location in which the MF Toolbox is installed and position to which the start menu is added appear.
Specify the settings in the respective screens, and then click [Next]. Click [Start] in the displayed screen.
9. Click [Exit].
The software for which the check box was selected in Step 4 is installed.
Follow the on-screen instructions.
10. Check that [ ] is selected in [Install], and then click [Next].
11. Restart your computer.
(1) Select the [Restart Computer Now (Recommended)] check box.
(2) Click [Restart].
* The CD-ROM may be removed once this screen appears.
12. Remove the cap (A) on the USB port of the machine.
Remove the cap by pulling out the string.
13. Connect the USB cable.
- Flat end (A): Connect to the USB port on the computer.
- Square end (B): Connect to the USB port on the machine.
note:
When a dialog box is displayed
- Follow the on-screen instructions and complete the installation.
Checking the installation results
Check that the MF drivers and MF Toolbox are installed correctly.
Check that the icons for the installed software are added as follows.
| Software |
Location |
Icon |
| Printer driver |
[Devices and Printers] folder |
|
| Fax driver |
[Devices and Printers] folder |
|
| Scanner driver |
[Scanners and Cameras] or [Scanners and Cameras Properties] folder |
|
| MF Toolbox |
Desktop |
|
