The following messages may appear on the LCD monitor.
| Busy... |
Image is being recorded to, or read from the memory card. Resetting settings to default. |
| No Memory card |
You attempted to shoot or replay images without a memory card installed. |
| Card Locked! |
The SD or SDHC memory card is write protected. |
| Cannot record! |
You attempted to shoot an image without a memory card installed, with a memory card installed in the incorrect orientation, or attempted to attach a sound memo to a movie. |
| Memory card error! |
The memory card may be malfunctioning. By formatting the malfunctioning memory card with the camera you may be able to continue using it. However,.if this error message appears even when using the supplied memory card, contact you Canon Customer Support Help Desk as there may be a problem with the camera. |
| Memory card full |
The memory card is full of images and no more can be recorded or saved. In addition, no more image settings, or sounds or sound memos can be recorded. |
| Change the battery pack |
Battery charge is insufficient to operate the camera. Replace it at once with a charged one or recharge the battery. |
| No image |
No images recorded on the memory card. |
| Image too large |
You attempted to replay an image larger than 5616 x 3744 pixels or with a large data size. |
| Incompatible JPEG |
You attempted to replay an incompatible JPEG file (an image that has been downloaded to a computer and altered., etc.) |
| RAW |
You attempted to replay an image recorded in a RAW format. |
| Unidentified Image |
You attempted to play back an image with corrupted data, an image with a recording type specific to another manufacturer's camera, or an image that has been downloaded to a computer and altered. |
| Cannot magnify! |
You attempted to magnify an image recorded in a different camera or data type, an image edited with a computer, or a movie. |
| Cannot rotate |
You attempted to rotate an image recorded in a different camera or data type, an image edited with a computer. |
| Incompatible WAVE format |
A sound memo cannot be added to this image since the data since the data type of existing sound memo is incorrect, or the sound memo cannot be played back, |
| Cannot register this image! |
You attempted to register an image recorded in a different camera, a RAW image, or a movie as a start-up image. |
| Cannot modify image |
You attempted to resize or perform red eye correction on a movie, RAW image or an image recorded with another camera; or you attempted to resize an image recorded using the Widescreen option, or an image already resized to XS. |
| Cannot assign to category |
You attempted to categorize an image recorded in a different camera. |
| Cannot Modify |
Cannot apply red-eye correction an no red-eye is detected. |
| Cannot transfer |
When transferring images to your computer using the Direct Transfer menu, you attempted to select a RAW image, an image with corrupted data, an image taken with a different camera or data type. You may also have attempted to select a movie when [Wallpaper] was selected in the Direct Transfer menu. |
| Protected! |
You attempted to erase or edit a protected image, movie, or sound memo. |
| Too many marks |
Too many images have been marked for printing or for inclusion in a slide show. Cannot process any more. |
| Cannot complete! |
Could not save the print, transfer, or slide shot settings. |
| Unselectable image |
You attempted to set the print settings for an non-JPEG file. |
| Cannot Select |
In selecting the image range for categorizing via the My Category function, protecting images, erasing images, or specifying print settings, you selected a starting image with a file number higher than the last image or a last image with a file number lower than the starting image. Or you specified more than 500 images. |
| Naming Error |
The file name could not be created because there is an image with the same name as the folder that the camera is attempting to create, or the highest possible file number has already been reached. In the menu change [File Numbering] to [Auto Reset] or format the memory card after the images have already been downloaded or stored on a computer. |
| Communication Error |
The computer was unable to download the image due to the large amount of images (approx. 1000) stored on the memory card. Use a USB card reader or a PCMCIA card adapter to download the images. |
| Lens error, restart camera. |
An error was detected while the lens was in motion, and the power has been automatically turned off. This error can occur if you hold the lens while it is in motion or you operate it in a location with excessive dust or sand in the air. Try turning the power back on, and resume shooting or playback. If this message continues to display, contact your Canon Customer Support Help Desk as there may be a problem with the lens. |
| Exx |
(xx: number) Camera malfunction. Turn the power off and then back on, then shoot and replay. A problem exists if the error code reappears. Note the number and contact our Canon Customer Support Help Desk. If an error code displays directly after taking a picture, the shot may not have been recorded. Check image in replay mode. |
