Installing Software on Your Computer

This section provides installation procedure of drivers to use the Canon imageCLASS MF5700 Series as a network or a local printer, fax and a local scanner (connected directly to your computer). (Fax function is available for the MF5750/5770 models only.)

Before you install the software, be sure to:

• Confirm the machine is not connected to your computer.
• Turn on the machine
• Quit any Windows application running on your computer.

• Use of a cable 9.8 ft (3 m) long or less is recommended.
• The screen shots shown are from Windows XP. However, the installation procedure is essentially the same for other versions of Windows.

1. Insert the CD-ROM into your CD-ROM drive.
   The [MF5700 Series Setup] screen appears.
   
   
   If the [MF5700 Series Setup] screen is not displayed, on the Windows desktop, click [Start], [My Computer] (Windows 98/Me/2000: double-click [My Computer]). Open the CD-ROM icon, the double-click [Setup(Setup.exe)].
   
   If you are installing from a copy saved on a network or hard disk, double-click [Setup(Setup.exe)] in the copy.
   
   
   
2. In the [MF 5700 Series Setup] screen, click [USB Connection].
   
   
   
3. Click [Install Drivers].
   
   
   
   
4. Click [Install MF Drivers].
   
   
   
   
5. Read the License Agreement, then click [Yes].
   
   
   
   
6. Click [Exit].
   
   
   
   If you are using Windows 98/Me, a message recommending you to restart your computer may appear. In this case, continue installing after restarting your computer.
   
   
   
7. In the [Install Drivers] screen, click [Install MF Toolbox].
   
   If you have closed the [Install Drivers] screen, on the Windows desktop, click [Start], [My Computer] (Windows 98/Me/2000: double-click [My Computer]). Open the CD-ROM icon, then double-click [Setup (Setup.exe)].
   
   If yo are installing from a copy saved on a network or hard disk, double-click [Setup (Setup.exe)] in the copy.
   
   
   
8. Click [Next].
   
   
   
9. Click [Continue].
   
   
   
   
10. Read the License Agreement, click [Yes].
    
    
    
    
11. When the [Choose Destination Location] dialog box appears, click [Next>].
    
    
    
    
12. Click [Next>].
    
    
    
    
13. Click [Exit].
    
    
    
    
14. Make sure that the machine is turned on.
    
    
    
15. Connect the USB cable to the machine and computer USB port.
    When you connect the USB cable to the computer, the machine is automatically detected as a new hardware. Wait for a while as your computer performs various settings.
    
    Depending on your computer, a message may display asking you to restart your computer.
    
    After restarting your computer, wait for a while for your computer to continue performing various settings.
    
    To install the accompanying applications, in the [MF5700 Series Setup] screen, click [Install Applications]. You can also install it later.
    
    To read the PDF manual on the CD-ROM, click [Read Manuals] on the [MF5700 Series Setup] screen.
    
    Installation is now complete. In the [MF5700 Series Setup] screen, click [Exit] to close the screen. Then remove the CD-ROM from the disk drive.