Loading Envelopes

Envelopes must be fed from the Rear Tray. Use either European DL or US Comm. Env. #10-sized envelope.

Important :

• You need to print from the computer to print on envelopes.
  
• Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals, or sticker flaps.
  
• Select either DL Env. or Comm. Env. #10 in the printer driver according to the envelope size you are using. If you do not, the address will be printed in the wrong direction.
  
  

(A) Printing orientation

(B) Make sure the flaps are folded.

(1) : Retract the Paper Support.

(2) : Load the envelope against the Cover Guide (the right side of the Paper Support).

Load with the front face UP and the rear flaps DOWN on the left.

A maximum of 10 envelopes can be loaded at once.

Important : Make sure that the Cover Guide is set upright.

(3) : Pinch the Paper Guide and slide it against the left side of the envelope.

(4) : Press the Paper Feed Switch so that the Rear Tray lamp lights up.

In the printer driver, select 'Envelope' in Media Type, and then select 'DL Env'. or 'Comm. Env. #10' in Page Size.