Procedure for using Macro Mode PowerShot A510 and A520

Article ID: ART160345 | Date published: 06/09/2015 | Date last updated: 08/18/2015
 

Description

Procedure for using Macro Mode PowerShot A510 and A520

Solution

Macro Mode

Use the macro mode to shoot close-ups of subjects in the range of 5 to 45 cm (2.0 in. to 1.5 ft.) at wide angle end and 30 to 45 cm (11.8 in. to 1.5 ft.) at telephoto end.

1. Press the <DISP.> button to turn the LCD monitor on.

2. Press the button.

  • The icon appears on the LCD monitor.
  • Pressing the  button until the  icon on the LCD monitor disappears cancels the macro mode.

3. Shoot the image.

  • The indicator beside the viewfinder will light yellow when the shutter button is pressed halfway.
  • Shooting procedures are the same as for the Mode.
  • Macro mode is not available in and modes.

  • Always use the LCD monitor to compose images in macro mode. Shooting with the viewfinder is possible, though, the parallax phenomenon may cause images composed with the optical viewfinder to be off-center.
  • When the lens is zoomed out to the wide angle end, the recordable area is 60 x 44 mm (2.4 in. x 1.7 in.)*1, and at telephoto end, it is 84 x 63 mm (3.3 in. x 2.5 in.).*2
  • The exposure may not be optimal when the flash is used in macro mode.

*1 Closest focal distance.

*2 Maximum optical telephoto setting.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments