Ask a Question

A Support Code Is Displayed - MG6620

Article ID: ART117280 | Date published: 05/12/2015 | Date last updated: 04/30/2019
 

Description

List of Support / Error Codes - MG6620

 

Solution

A Support Code Is Displayed
ID: 8202082000_ EN_ 2
Issue

 

The support code appears on the touch screen and the computer screen when an error occurs.
"Support Code" means the error number and appears with an error message.
When an error occurs, check the support code displayed on the touch screen or the computer screen and take the appropriate action.

 
Cause

Support Code=1600
Summary

 

<Cause>
If the lamp on the ink tank is flashing, ink may have run out.
<Action>
Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, tap OK on the machine with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition.
REFERENCE
  • If multiple ink lamps are flashing, check the status of each ink tank.

 
See Also Replacing an Ink Tank
Cause

Support Code=1401, 1403, 1405
Summary

 

<Cause>
The print head may be damaged.
<Action>
 

 
See Also  
Cause

Support Code=1680
Summary

 

<Cause>
Some ink tanks are not installed in the correct position. (The lamp on the ink tank flashes.)
<Action>
Confirm that the ink tanks are installed in the appropriate positions.

 
See Also Replacing an Ink Tank
Cause

Support Code=1681
Summary

 

<Cause>
More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.)
<Action>
Confirm that the ink tanks are installed in the appropriate positions.

 
See Also Replacing an Ink Tank
Cause

Support Code=1660
Summary

 

<Cause>
The ink tank is not installed.
<Action>
Install the ink tank.

 
See Also Replacing an Ink Tank
Cause

Support Code=1684
Summary

 

<Cause>
The ink tank cannot be recognized.
<Action>
Printing cannot be executed because the ink tank may not be installed properly or may not be compatible with this machine.
Install the appropriate ink tank.
If you want to cancel printing, press the machine's Stop button.

 
See Also Replacing an Ink Tank
Cause

Support Code=1410, 1411, 1412, 1413, 1414
Summary

 

<Cause>
The ink tank cannot be recognized.
<Action>
Open the operation panel and replace the ink tank which lamp is off.

 
See Also Replacing an Ink Tank
Cause

Support Code=1688
Summary

 

<Cause>
The ink has run out. (The lamp on the ink tank flashes.)
<Action>
Replace the ink tank and close the operation panel.
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the machine's Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized.
Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.
REFERENCE
If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed in the remaining ink volume screen on the touch screen.

 
See Also  
Cause

Support Code=1700, 1701, 1712, 1713, 1714, 1715
Summary

 

<Cause>
The ink absorber is almost full.
<Action>
Tap OK on the touch screen to continue printing. 

 
See Also  
Cause

Support Code=5B00, 5B01, 5B12, 5B13, 5B14, 5B15
Summary

 

<Cause>
Printer error has occurred.
<Action>
 
See Also  
Cause

Support Code=2900
Summary

 

<Cause>
Scanning the print head alignment sheet has failed.
<Action>
Tap OK on the touch screen to dismiss the error, then take the actions described below.
  • Make sure that the print head alignment sheet is set in the correct position and orientation on the platen glass.
  • Make sure the platen glass and the print head alignment sheet are not dirty.
  • Make sure the type and size of loaded paper is suitable for Automatic Print Head Alignment. For Automatic Print Head Alignment, always load one sheet of A4 or Letter-sized plain paper.
  • Make sure if print head nozzles are clogged. Print the nozzle check pattern to check the status of the print head.
If the error is not resolved, perform Manual Print Head Alignment.

 
See Also  
Cause

Support Code=B202, B203, B204
Summary

 

<Cause>
An error requiring you to contact the service center has occurred.
<Action>
Turn off the machine, and unplug the power cord of the machine from the power supply.
Service is required.

For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account
 

 
See Also  
Cause

Support Code=5100, C000
Summary

 

<Cause>
Printer error has occurred.
<Action>
Cancel printing, turn off the machine, then confirm the following.
  • Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.
If any, remove the materials.
  • Confirm that the ink tanks are installed properly.
Push down the ink tanks until they click into places.
After confirming the conditions above, turn on the machine again.
 
IMPORTANT
  • When you clear the jammed paper or protective material that is preventing the print head holder from moving, be careful not to touch the components inside the machine. The machine may not print out properly if you touch it.

 
See Also  
Cause

Support Code=5011, 5012, 5200, 5400, 6000, 6500, 6502, 6800, 6801, 6900, 6901, 6902, 6910, 6911, 6930, 6931, 6932, 6933, 6934, 6935, 6936, 6937, 6938, 6940, 6941, 6942, 6943, 6944, 6945, 6946
Summary

 

<Cause>
Printer error has occurred.
<Action>
Turn off the machine, and unplug the power cord of the machine from the power supply.
Plug the machine back in and turn the machine back on.

 
See Also  
Cause

 
Summary

 

If Support Code=6910 is displayed, follow the procedures below.
1. Temporarily turn off the power of all other devices on the network.
2. Set the [ IPv6 settings ] of the machine to [ Inactive ].
3. Place the machine in a different location.

 
See Also  
Cause

 
Summary

 

 

 
See Also  
Cause

 
Summary

 

REFERENCE
  • How to Disable the IPv6 Settings of the Machine
1. Select [ Setup ] on the operation panel.
2. Select [ Device settings ].
3. Select [ LAN settings ].
4. Select [ Other settings ].
5. Select [ TCP/IP settings ].
6. Select [ IPv6 ].
7. When a message displays, select [ Yes ].
8. Select [ Enable/disable IPv6 ].
9. In the screen displayed, select [ Inactive ].

 
See Also  

MG6620 Page

SIMS Doc Id

8202082000

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments